相關專作
1. Chen, J.S., Yuan, J.X., Ni, J., and Wu, S. M., 1992, “Compensation of Non-rigid Body Kinematic Effect on a Machining Center,” Transaction of NAMRI/SME, Vol. 20, pp.325-329 (SCI)
2. Chen, J.S., Yuan, J.X., Ni, J., and Wu, S. M., 1993, “Real-time Compensation of Time-Variant Volumetric Error on a Machining Center,” Transactions of the ASME, Journal of Engineering for Industry, Vol. 115, pp.472-479 (SCI)
3. Chen, J.S., 1995, “Computer-Aided Accuracy Enhancement of Multi-Axis CNC Machine Tool,” International Journal of Machine Tools and Manufacturing, Vol.35, No. 4, pp.593-605 (SCI)
4. Chen, J.S., and Chiou, G., 1995, “Quick Testing and Modeling of Thermally-Induced Errors of CNC Machine Tools,” International Journal of Machine Tools and Manufacturing, Vol. 35, No. 7, pp.1063-1074 (SCI), NSC 83-0422-E194-002
5. Chen, J.S., and Ling, C.C., 1996, “Improving Machine Accuracy through Machine Tool Metrology and Error Corrections,” International Journal of Advanced Manufacturing Technology, Vol. 11, No.3, pp.198-205 (SCI), NSC82-0401-E194-020
6. Chen, J.S., Yuan, J.X., and Ni, J., 1996, “Thermal Error Modeling for Real-Time Error Compensation,” International Journal of Advanced Manufacturing Technology, Vol. 11, No.12, pp.266-275 (SCI)
7. Chen, J.S., 1996, “Neural Network-Based Modeling and Error Compensation of Thermally-Induced Spindle Errors,” International Journal of Advanced Manufacturing Technology, Vol. 11, No.12, pp.303-308 (SCI), NSC82-0422-E194-022
8. Chen, J.S., 1996, “A Study of the Thermally-Induced Machine Tool Errors in Real Cutting Conditions,” International Journal of Machine Tools and Manufacturing, Vol.36, No.12, pp. 1401-1411, 1996 (SCI), NSC84-2212-E194-012
9. Chen, J.S., 1997, “Fast Calibration and Modeling of Thermally-Induced Machine Tool Errors in Real Machining,” International Journal of Machine Tools and Manufacturing, Vol.37, No.2, pp.159-169, 1997 (SCI), NSC85-2212-E194-013
10. Yau, H. T., and Chen, J. S., 1997, “Reverse Engineering of Complex Geometry using Rational B-Splines,” International Journal of Advanced Manufacturing Technology, Vol. 13, pp.548-555, 1997 (SCI)
11. Chen, J. S., Kou, T. W., and Chiou, S. H., 1999, “Geometric Error Calibration of Multi-Axis Machines Using an Auto-Alignment Laser Interferometer,” Journal of the American Society for Precision Engineering. Vol.23, No.4, pp.243-252, Oct. 1999, (SCI), NSC86-2212-E194-006
12. Chen, J.S., and Dwang, I.C., 2000, “A Ballscrew Drive Mechanism with Piezo-Electric Nut for Preload and Motion Control,” International Journal of Machine Tools and Manufacture, Vol.40, NO.4, pp.513-526, 2000, (SCI), NSC87-2212-E194-006
13. Chen, Jenq-Shyong, Chen, Kuo-Chen, Lai, Zhang-Chan, and Huang, Yong-Kuo, 2003, “Friction Characterization and Compensation of a Linear-Motor Rolling-Guide Stage,” International Journal of Machine Tools and Manufacture, Vol. 43, pp 905 – 915, July 2003, (SCI), NSC89-2212-E-194-033.
14. Chen, Jenq-Shyong and Hsu, Wei-Yao, 2003, “Characterizations and Models for the Thermal Growth of a Motorized High Speed Spindle,” International Journal of Machine Tools and Manufacture, Vol. 43, pp 1163-1170, September 2003, (SCI), NSC90-2212-E194-003.
15. Chen, Jenq-Shyong and Hsu, Wei-Yao, 2004, “Design and Analysis of a Tripod Machine Tool with an Integrated Cartesian Guiding and Metrology Mechanism,” Precision Engineering, Volume 28, Issue 1 , January 2004, Pages 46-57
16. Chen, Jenq-Shyong, Huang, Yong-Kuo, and Chin-Chun Cheng, 2004, “Mechanical Model and Contouring Analysis of the High-Speed Ballscrew Drive Systems with Compliance Effect,” International Journal of Advanced Manufacturing Technology, Volume 24, Numbers 3 , August 2004 , 241 - 250 , (SCI), NSC88-2622-E-194-003.
17. Hsu, Wei-Yao, and Chen, Jenq-Shyong, 2004, “Error Analysis and Auto-Calibration for a Cartesian-Guided Tripod Machine Tool,” International Journal of Advanced Manufacturing Technology, Volume 24, Numbers 11-12, December 2004, 899 - 909 , (SCI), NSC89-2212-E-194-024-
18. Chen, Jenq-Shyong, Huang, Yung-Kuo and Chen, Mao-Son, 2005, “Feedrate Optimization and Tool Profile Modification for the High-Efficiency Ball-End Milling Process,” International Journal of Machine Tools and Manufacture , Vol. 45 (2005) 1070-1076, (SCI), NSC91-2622-E-194-007-CC3
19. Chen, Jenq-Shyong, Huang, Yung-Kuo and Chen, Mao-Son, 2005, “A Study of the Surface Scallop Generating Mechanism in the Ball-End Milling Process,” International Journal of Machine Tools and Manufacture, Vol. 45 (2005) 1077-1084, (SCI), NSC91-2622-E-194-007-CC3
20. Chen, Jenq-Shyong, and Chen, Kwan-Wen, 2005, “Bearing load analysis and control of a motorized high speed spindle,” International Journal of Machine Tools and Manufacture, Vol. 45(2005) 1487-1493, (SCI), NSC91-2212-E-194-028
21. Chen, Jenq-Shyong, and Hsu, Wei-Yao, 2006, “Dynamic and Compliant Characteristics of a Cartesian Guided Tripod Machine Tool,” ASME Transactions, Journal of Manufacturing Science and Engineering, May 2006, p.494-502(SCI), NSC89-2212-E-194-024.
22. Chen, Jenq-Shyong, and Hwang, Yii-Wen, 2006, “Centrifugal Force Induced Dynamics of a Motorized High-Speed Spindle,” International Journal of Advanced Manufacturing Technology (2006) 30:10-19 , (SCI), NSC91-2212-E-194-028
23. Chen, Jenq-Shyong, Kuo, Yao-Hung, and Hsu, Wei-Yao, 2006, “The Influence of Friction to the Contouring Accuracy of a Cartesian Guided Tripod Machine Tool,” International Journal of Advanced Manufacturing Technology (2006) 30:470-478 , (SCI), NSC89-2212-E-194-024.
24. Chou, Xiang-Rui, Wang, Jia-Xing, and Chen, Jenq-Shyong, “Laser direct writing of diamond micro-nozzle using Q-switched Nd-YAG laser,” Journal of the Chinese Society of Mechanical Engineers, 29/4, 2008, p.289-297, (EI)
25. Chen, Kuan-Chou, Hu, Chin-Yu and Chen, Jenq-Shyong, “Dynamic Interaction of a Distributed Guideway and a Asymmetrical Magnetically Suspended Vehicle With Unbalanced Mass,” Journal of the Chinese Society of Mechanical Engineers, 29/6, 2008, (EI)
26. Chen, Kuan-Chou, Hu, Chin-Yu and Chen, Jenq-Shyong, “Dynamic Interaction of a High-Speed Multimagnet Suspension Vehicle and a Distributed Discretely Supported Guideway,” Journal of the Chinese Society of Mechanical Engineers, 30/1, 2009, (EI)
27. Hu, Chin-Yu, Chen, Kuan-Chou, and Chen, Jenq-Shyong, “Dynamic Interaction of a High-Speed Vehicle and a Distributed Discretely Supported Guideway,” Journal of Mechanics, 2009, (SCI), Accepted
28. Hu, Chin-Yu, Chen, Kuan-Chou, and Chen, Jenq-Shyong, “"Dynamic Interaction of a Distributed Supported Guideway and a Asymmetrical Multimagnet Suspension Vehicle with Unbalanced Mass,” Journal of Mechanics, 2009, (SCI), Accepted
1. Chen, J.S., Yuan, J.X., Ni, J., and Wu, S. M., 1991, “Real-time Compensation of Time-Variant Volumetric Error on a Machining Center, ” ASME Winter Annual Meeting
2. Chen, J.S., Yuan, J.X., Ni, J., and Wu, S. M., 1992, “Thermal Error Modeling for Volumetric Error Compensation, ” ASME Winter Annual Meeting
3. Chen, J.S., 1993, “Computer-Aided Accuracy Enhancement of Multi-Axis CNC Machine Tool”, 1993 Sino-German Joint Symposium on Precision and High Speed Manufacturing Technology, Taipei, Taiwan、Chen, J.S., and Ling, C.C., 1994, “Improving the Machine Accuracy through Machine Tool Metrology and Error Corrections”, American Society for Precision Engineering Annual Meeting
4. Chen, J.S., 1995, “Accuracy Enhancement of Multi-Axis Machine Tools using Real-Time Error Compensation”, 8th International Precision Engineering Seminar, France
5. Chen, J.S., 1995, “Calibration and Accruacy Enhancement of a Machining Center through Error Corrections”, International Conference on Precision Engineering ’95 (2nd ICMT), Singapore
6. Yau, H.T., and Chen, J.S., 1995, “CMM Digitization and Geometric Modeling of Engine Intake Block”, International Conference on Precision Engineering ’95 (2nd ICMT), Singapore
7. Ling, C.C., Chen, J.S., and Morse, I.E., 1995, “An Experimental Investigation of Damping Effects on a Single Point Cutting Process”, ASME Winter Annual Meeting, San Fransisco, USA
8. Yau, H.T., and Chen, J.S., 1996, “Surface Approximation and Automatic Generation of Complex Geometric Model from Laser Scan Data”, 1996 American Society for Precision Engineering Annual Meeting，Monterey, California
9. Chen, J. S., 1997, “An Auto-Alignment Laser Interferometer for Diagonal Measurement of Multi-axis Machine Tool”, 9th International Precision Engineering Seminar, May, 26~30, 1997, Braunschweig, Germany
10. Chen, J. S., 1997, “Geometric Error Calibration of Multi-axis Machines using an Auto-Alignment Laser Interferometer”, Asia-Pacific Symposium on Instrumentation, August, 25-31, 1997, Huangshan, China
11. Chen, J. S.,1997, “Geometric Error Calibration of Multi-axis Machines using an Auto-Alignment Laser Interferometer”, 1997 Annual Meeting of the American Society for Precision Engineering, Oct. 5-10, 1997, Norfolk, Virginia
12. Chen, J. S., “Active Bearing Preload Control of a High Speed Spindle Using Piezoelectric Actuators”, 3rd International Conference on Precision Engineering, Nov. 18-20, 1997, Taipei, Taiwan, R.O.C
13. Chen, J. S., 1998, “Active Bearing Preload Control of a High Speed Spindle Using Piezoelectric Actuators”, 13th Annual Meeting of American Society for Precision Engineering, Oct. 25-30, 1998, St. Louis, Missouri.
14. Chen, J. S., 1998, “A Piezo-electric-nut for Preload and Positioning Control of High-speed and Ultra-precision Positioning Stages, ” 1998 International Conference on Mechantronic Technology (ICMT’98), Nov.30-Dec.2, 1998, Hsinchu, Taiwan.
15. Chen, J. S., 1999, “The Development of a High-Speed Spindle for Machining Center”, 1999 Sino-German Joint Symposium on High Speed and High Precision Machining, March 15-16, 1999, Tainan, Taiwan
16. Chen, J. S., 1999, “The Development of a High-Speed Spindle for Machining Center”, International Conference on Advanced Manufacturing Technology, June 16-18, 1999, Xi’an, China
17. Chen, J. S., 1999, “Geometric error analysis and calibration of a Stewart platform”, 14th Annual Meeting of American Society for Precision Engineering, Oct.31-Nov. 5, 1999, Monterey, California, USA
18. Chen, J. S., 2000, “Design and Application of High Speed Spindles for Machine Tools,”, International Conference on Frontiers of Design and Manufacturing, June 17-19, 2000, Zheijang University, Hangzhou, China
19. Chen, J. S., 2001, “Dual-Mode Friction Compensation of a Precision Linear-Motor Rolling-Guide Stage,” 2nd International Conference of European Society for Precision Engineering and Nanotechnology, May 26-30, 2001, Turin, Italy
20. Chen, J. S., 2001, “Some Issues of the Ball Bearing Motorized Spindle,” 2001 Summer Topical Meeting of the American Society for Precision Engineering, Precision Bearings and Spindle, June 18-19, 2001, State College, Pennsylvania
21. Chen, J. S. and Huang ,Y.K., 2001, “Modeling and Contouring Error Analysis of a High-Speed Ballscrew Drive System with Compliance Effect,” Third International Conference on Metal Cutting and High Speed Machining, June 27-29, 2001, Metz, France
22. Chen, J. S., 2001, “Geometric Error and Stiffness Analysis of a New Kind of Parallel-Link Tripod Machine Tool,” 6th International Conference on Manufacturing Technology, Dec. 16-18, 2001, Hong Kong
23. Chen, J.S., 2002, “Low Speed Tracking Control of a Precision Linear-Motor Rolling-Guide Stage ,” 3rd International Conference of European Society for Precision Engineering and Nanotechnology, May/26-30, 2002, Eindhoven, Netherlands
24. Chen, J.S. and Hsu, W. Y., 2002, “Kinematic and Stiffness Analysis of a Novel Ortho-Guided Tripod Machine Tool, ” 17th Annual Meeting of American Society for Precision Engineering, Oct.20-25, 2002, St. Louis, Missouri, USA
25. Chen, Jenq-Shyong ,Hsu, Wei-Yao, “Kinematic Analysis and Comparison of Ortho-Guided Tripod (OGT) Machine”, 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-Yi, Taiwan
26. Chen, Jenq-Shyong, Chou, Xiang- Rui, “A Study of The Hybrid Aerostatic- and Aerodynamic- Bearing”, 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-Yi, Taiwan
27. Jenq-Shyong Chen, Zhang Chan Lai, Yong-Kuo Huang, “Low Speed Tracking Control of a Precision Linear-Motor Rolling-Guide Stage”, 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-Yi, Taiwan
28. Chen, J.S., 2003, “Mechanical Model and Simulation of the Ultrasonic Vibration Assisted Turning Process,” International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and Equipments of the European Society for Precision Engineering and Nanotechnology, May 19-20, 2003, Aachen, Germany
29. Hsu, W. Y., and Chen, J.S., 2003, “Dynamic Model and Servo Control of the Cartesian Guided Tripod Machine,” ICMT 2003, December, Taipei, Taiwan
30. Huang, Y. K. and Chen, J.S., 2004, “An image-based virtual confocal pinhole technology for 3D surface measurement,” The 2nd International Symposium on Precision Mechanical Measurements, 2004/08/24, Beijing, China
31. Chen, J.S., and Huang, Y.K., “High-speed subsurface microstructure measurement using optical coherence tomography,” 第一屆海峡两岸实验力学研讨会，2005年7月30日-8月1日 北京
32. Chou, X.R., Wang, J.X., and Chen, J.S., “Micro-structuring of single crystal diamond using Nd-YAG laser,” 7th International Conference on Frontiers of Design and Manufacturing, Guangzhou, China, June 19-22, 2006
33. Chen, J.S., and Hunag, Y.K., "A polarized low coherence interference microscope for the effect and birefringence mapping of the intra-interfaces," 第二屆海峡两岸实验力学研讨会，2007年7月，成功大學
34. Chen, J.S., "Full-Field Mapping of the Stress-Induced Birefringence on the Internal Interfaces Using a Polarized Low Coherence Light Interference Microscope," 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, July 1-6, 2007
35. Chen, J.S., and Huang, Y.K., “Full-field mapping of the stress-induced birefringence using a polarized low coherence interference microscope,” ISIST2008, 5th International Symposium On Instrumentation Science And Technology, September 15~18，2008, Shenyang，China
36. Cheng, C.W., Chen, J.S., Lee, Y.L., Shen, W.C., Chien, C.W., and Chen, H.H., "Laser-induced crystallization of amorphous indium tin oxide film on glass substrate for patterning application," The 5th International Congress on Laser Advanced Materials Processing, Kobe, Japan, June/29~July/2, 2009
37. Cheng, C.W., Chen, J.S., Lee, Y.L., Shen, W.C., and Chien, C.W., "Micro patterning of a crystalline structure on a-ITO film deposited on plastic with 1kHz femtosecond laser pulses," The 5th International Congress on Laser Advanced Materials Processing, Kobe, Japan, June/29~July/2, 2009
38. Cheng, C.W., Chen, J.S., Lee, P.X., and Chien, C.W., "Fabrication of microstructures on photosensitive glass using femtosecond laser processing and chemical etching," The 5th International Congress on Laser Advanced Materials Processing, Kobe, Japan, June/29~July/2, 2009
39. Chen, J.S., and Chiou, C.Y., “Polarized multi-color digital holographic microscope for contour surface measurement,” 第三屆海峡两岸实验力学研讨会，2009年7月30日-8月1日, 內蒙古工業大學
40. Chen, J.S., and Lai, C.H., "Modeling and compensation for the dynamically thermal errors of a high speed spindle," 現代精度理論及應用學術研討會，2009年8月25-26, 新竹，台灣
1. 陳政雄、鄭富榮，1993， “綜合加工機主軸熱變形之即時補償”，中國機械工程學會第十屆學術研討會，交通大學
2. 陳政雄、蔡德輝，1993， “CNC工具機動態輪廓誤差之檢測與改善”，中國機械工程學會第十屆學術研討會，交通大學
3. 陳政雄、林呈彰，1994， “CNC工具機定位精度之軟體式誤差補償”，第15屆中美近代科技研討會，台北
4. 陳政雄、蔡坤妙，1994， “電腦輔助工具機誤差量測與補償”，中國機械工程學第十一屆學術研討會，中興大學
5. 陳政雄、林呈彰、蕭庭郎、劉嘉峰，1995， “工具機高速主軸之技術發展”，中國機械工程學會第十二屆學術研討會，中正大學
6. 陳政雄，1995， “Calibration and Modeling of Thermally-Induced Machine Tool Errors in Real Machining”，中國機械工程學會第十二屆學術研討會，中正大學
7. 林呈彰、陳政雄、陳明豐，1995， “Introduction to Theory and Application of Damping Device for Turning Process”，中國機械工程學會第十二屆學術研討會，中正大學
8. 陳政雄、林呈彰，1996， “高速主軸軸承預壓之壓電式控制”，中國機械工程學會第十三屆學術研討會，台灣大學
9. 林呈彰、陳政雄、廖俊雄，1996， “鋁合金高速切削對表面精度影響之研究”，中國機械工程學會第十三屆學術研討會，台灣大學
10. 陳政雄、周生華, 1997， “Geometric Error Calibration of Multi-axis Machines using an Auto-Alignment Laser Interferometer”, 中國機械工程學會第十四屆學術研討會，中央大學
11. 林呈彰、陳政雄、王惟正、陳明豐，1997，“主動式與被動式顫振控制合成效應之探討”, 中國機械工程學會第十四屆學術研討會，中央大學.
12. 黃永國、陳政雄，1998，“球形端銑刀切削殘留分析”, 中國機械工程學會第十五屆學術研討會，成功大學
13. 鄭中緯、陳政雄，1999，“並聯機構平台機構參數自我校正之研究”, 中國機械工程學會第十六屆學術研討會，清華大學
14. 陳政雄、陳春志，2000，“CNC高速進給系統之動態輪廓運動分析”, 第一屆海峽兩岸製造技術研討會，台灣大學，2000/1/18-19
15. 黃永國、陳政雄，2001，“高速滾珠螺桿進給系統之動態輪廓誤差分析”, 第十二屆全國自動化科技研討會，虎尾技術學院，2001/5/25-26
16. 張萬欽、簡國諭、陳政雄, 2002，“超音波振動輔助車削電腦模擬與分析” ,中國機械工程學會全國學術研討會，2002年，11月
17. 陳政雄、許巍耀，2003，“Design and analysis of a Tripod machine tool with an integrated Cartesian guiding and metrology mechanism”, 第三屆海峽兩岸製造技術研討會，台灣科技大學，2003/2/24-25
18. 張佑華、陳政雄，2003，“Ka頻段之微機電微波率波器”, 第二十屆中國機械工程學會，台灣大學，2003/12/5-6
19. 黃凱、陳政雄，2004，“光學同調斷層掃瞄系統的光程調製機制之研究”, 第四屆全國自動化光學檢測技術論壇與展覽，新竹交通大學，2004/10/28
20. 黃永國、陳政雄，2004，“運用多層二維影像反捲積實現三維表面量測”, 第四屆全國自動化光學檢測技術論壇與展覽，新竹交通大學，2004/10/28
21. 黃永國、陳政雄，2006，“偏極化光學同調斷層掃瞄技術於表面下缺陷與應力測量, 第六屆全國自動化光學檢測技術論壇與展覽，新竹交通大學，2006/10
22. 蘇柏仰、陳又誠、陳政雄, “無線式表面聲波感測器在轉動軸扭矩之應用,” 第十屆車輛工程研討會, 彰化大葉大學，2006/10
23. 陳韋志、陳政雄、胡紹俊、羅民芳, “應用軟性壓印法製作奈米碳管紅外光感光元件,” 第二十五屆機械工程學會,大葉大學,2008/11
24. 陳輝憲、陳政雄、鄭中緯、呂育廷, “皮秒雷射應用於多晶化氧化銦錫之圖案技術,” 第二十五屆機械工程學會,大葉大學,2008/11
25. 華建鈞、陳政雄, “臥式綜合加工機熱誤差之量測與補償,” 第二十五屆機械工程學會,大葉大學,2008/11
26. 簡良翰、陳政雄、胡紹俊、羅民芳, “可撓性氧化鋅壓電感測器之製作,” 第六屆全國精密製造研討會，崑山科技大學，台南，2008/11/8
1. 陳政雄、林呈彰, 1998, “工具機高速主軸之發展與技術問題” ,機械月刊，1998年，3月
2. 陳政雄, 1999, “工具機高速高精度進給系統” ,機械月刊，1999年，1月，機械月刊金筆獎第三名
3. 陳政雄, 1999, “並聯式機構工具機” ,機械月刊，1999年，3月
4. 陳政雄、許巍耀、黃執成，1999，“五軸工具機體積誤差模型與靈敏度分析” ,機械工業雜誌， 1999年，7月
5. 陳政雄、陳春志，2000，“高速進給系統之動態輪廓運動誤差分析” ,機械月刊，2000年，3月
6. 陳政雄，2000，“切削加工技術未來發展趨勢” ,機械月刊，2000年，5月
7. 陳茂森、黃永國、陳政雄，2000，“球形端銑刀刀刃運動軌跡之分析” ,機械月刊，2001年，8月
8. 陳政雄，2001，“超精密奈米加工技術之進展、應用與未來趨勢” ,機械月刊，2001年，8月
9. 張萬欽、陳政雄, 2001，“超音波振動輔助切削之發展趨勢與展望” ,機械月刊，2001年，8月
10. 陳育斌、方思巽、陳政雄,”PCB鑽孔機氣靜壓高速主軸軸承設計,” 機械月刊，2002年，3月
11. 陳政雄、許巍耀, 2002, “並聯式工具機發展現況” ,機械月刊，2002年，3月
12. 許巍耀、陳政雄, 2002, “Ortho-guided Tripod並聯式工具機之分析” ,機械月刊，2002年，3月
13. 張萬欽、陳政雄、簡國諭, 2002，“超音波振動於微小鑽削加工之發展趨勢” ,機械技術雜誌，2002年，4月
14. 簡國諭、張萬欽、陳政雄, 2002，“超音波振動輔助車削:動態幾何參數電腦模擬與分析” ,機械月刊，2002年，9月
15. 簡國諭、張萬欽、陳政雄, 2003，“超音波振動輔助車削:動態切削力與表面粗糙度電腦模擬分析” ,機械月刊，2003年，7月
16. 許巍耀和陳政雄, 2003，“正交拘束三軸並聯式工具機之誤差分析與自我校正 ,機械月刊，2003年，2月
17. 陳政雄, 2004，“飛秒脈衝雷射之精密加工技術” ,機械月刊，2004年，3月
18. 陳政雄, 2005，“硬脆性材料的雷射超精密加工技術” ,機械工業雜誌，2005年，3月
19. 陳政雄, 2005，“智慧型刀把、主軸與工具機” ,機械月刊，2005年，3月
20. 許巍耀和陳政雄, 2005，“CGT工具機之動力模型與伺服控制” ,機械月刊，2005年，3月
21. 陳政雄, 2006，“高速乾切削工具機技術” ,機械月刊，2006年，3月
22. 陳政雄, 2006，“智能化工具機” ,機械月刊，2006年，3月
23. 陳政雄, 2007，“複合化工具機與複合化加工技術” ,機械月刊，2007年，3月
24. 陳政雄, 2008，“智能化工具機技術” ,機械月刊，2008年，3月
25. 鄭中緯、陳政雄, 2008，“飛秒脈衝雷射之精密加工技術” ,機械月刊，2008年，3月
26. 陳政雄、羅民芳、胡紹俊、陳又誠, "無線式表面聲波扭力感測器之製作與特性檢測", ,機械月刊，2009年，3月
27. 鄭中緯、沈威志、陳政雄、李依如, 2009，“飛秒雷射應用於軟性基板之多晶ITO圖案研究” ,機械工業雜誌，2009年，6月