NEAT Home  首頁          


 Ming-Tsang Lee 李 明蒼, PhD

 Mechanical Engineering / University of California, Berkeley 

 美 國加州大學柏克萊校區機械工程博士



國立清華大學 (National Tsing Hua University)     /    動力機械工程學系 (Department of Power Mechanical Engineering)    /   副教授 (Associate Professor)   /   (08, 2018~)
國 立中興大學 (National Chung Hsing University)   /   機械工程學系 (Department of Mechanical Engineering)    /   副教授 (Associate Professor)   /   (08, 2015~07, 2018)

國 立中興大學 (National Chung Hsing University)   /   機械工程學系 (Department of Mechanical Engineering)    /   助理教授 (Assistant Professor)   /   (08, 2011~07, 2015)
University of California, Berkeley   /   Department of Mechanical Engineering   /  
博士後研究員 (Postdoctoral Research Fellow)   /   (2008~2011)
Lawrence Berkeley National Laboratory   /   Environmental Energy Technologies Division   /  
訪問科學家 (Visiting Scientist)   /   (2008~2011)


微 觀熱傳質傳   /   Microscale Heat and Mass Transfer
新興能源科技   /   Renewable Energy
雷射輔助微奈米製造技術  /   Laser Assisted Micro/Nano Fabrication Technology



中華民國力學學會「年輕力學學者獎」 / Distiguished Young Scholar of Society of Theoretical and Applied Mechanics 2018

科技部工程司熱流學門優秀年輕學者研究計畫 / Outsanding Young Scholar Research Grant / Ministry of Science and Technology, Taiwan R.O.C. 2017

國立中興大學傑出青年教師獎勵 / Outstanding Young Faculty Award / National Chung Hsing University 2016

國立中興大學特優導師  /  Distinguished Mentor Award  /  National Chung Hsing University 2016

臺灣綜合大學系統「年輕學者創新研究選拔」佳作獎   /  Young Scholar Research Award / Taiwan Comprehensive University System 2015

國立中興大學教學特優 I    /   Distinguished Teaching Award I /  National Chung Hsing University 2015

國立中興大學「興人師獎」   /   Students-vote Outstanding Instructor Award /  National Chung Hsing University 2014, 2015, 2016

Committee Member   /   Committee on Nanoscale Heat Transport (K-9)   /   ASME Heat Transfer Division since 2014

國立中興大學工學院優良導師獎   /   Outstanding Mentor Award   /   College of Engineering, National Chung Hsing University 2013, 2014, 2015, 2016

國立中興大學工學院傑出教學教師獎    /   Outstanding Instructor Award   /   College of Engineering, National Chung Hsing University 2015

國立中興大學工學院傑出青年教師獎   /   Outstanding Young Faculty Award   /   College of Engineering, National Chung Hsing University 2013

Outstanding Graduate Student Instructor    /   University of California, Berkeley   2008

Honorary Member of The Phi Tau Phi Scholastic Honor Society, Taiwan, R.O.C. 1999



陳文凱(台大)、黃京淇(台大)、黃佩君、范芝榕、陳仕杰同學團隊榮獲2017程泰集團「精密工具機與智慧化技術」暨中興大學「精密工具機與智慧化技術」專題實作競賽 【研究生組-第三名】(與台大機械莊嘉揚教授團隊合作)
專題生 唐瑋辰、謝鎮洋、楊詠任同學團隊榮獲2017旭泰科技論文獎「高速主軸創新應用實作」競賽【旭泰銅獎】
專題生 陳仕杰、楊昌儒、高慶昌同學團隊榮獲105學年度「國立中興大學工學院專題研究成果競賽」【優等】
專題生 陳仕杰、楊昌儒、高慶昌同學團隊榮獲2016全國大專院校產學創新實作競賽機械及自動化組 【最佳實作獎】 
Dr. Abdoul Karim Sekone 博士論文榮獲中國機械工程學會105年度博士論文獎【佳作】
陳文凱(NTU)、藍辰睿、黃佩君團隊榮獲2016全研科技「對位平台創意應用實作」競賽 【銅研獎】(與台大機械莊嘉揚教授團隊合作)
專題生 陳仕杰、楊昌儒、高慶昌同學團隊榮獲2016程泰集團「精密工具機與自動化技術」暨中興大學「精密工具機與自動化技術」專題實作競賽 【優等】(第一名)
周揚登、陳昭瑾、方文佑同學團隊榮獲2016旭泰科技論文獎「高速主軸創新應用實作」競賽 【旭泰銅獎】


洪名杰同學榮獲2015上銀機械碩士論文獎 【銅質獎】

黃硯修、黃琦文、陳美惠同學團隊榮獲2015旭泰科技論文獎「高速主軸創新應用實作」競賽 【旭泰銀獎】
洪名杰、劉家安同學團隊榮獲2015旭泰科技論文獎「科技論文競賽」 【旭泰銅獎】
題生簡伯丞、蔡長融、曾睿正同學團隊榮獲2015程泰集團「精密工具機與自動化技術」暨中興大學「精密工具機與自動化技術」專題實作競賽 【中科產學訓獎】
蔡松霖、藍辰睿、劉家安同學團隊榮獲2015全研科技論文獎競賽 【金研獎】
劉誼凱、謝易諺、劉家安同 學參加2014全研科技XXY對位平台創意應用實作競賽,榮獲【佳作】
劉誼凱同 學參加2014全研科技碩士論文競賽,榮獲一般大學組【佳作】



Journal Papers        *corresponding author        [Google Scholar Citations]

  1. C. K. Yang and M. T. Lee*, "An optimization analysis of cooling channel design in a CNC lathe spindle system." Journal of the Chinese Society of Mechanical Engineering (2018, accepted) (SCI)
  2. M.J. Gu, M.T. Lee, C.H. Huang, C.C. Wu, and  Y.B. Chen*, "Synchronous scattering and diffraction from gold nanotextured surfaces with structure faactors." Journal of Quantitative Spectroscopy and Radiative Transfer (2018) 210 165-172 (SCIE)
  3. C. J. Lan, S. L. Tsai, M. T. Lee*, "Direct silver micro circuit patterning on transparent polyethylene terephthalate film using laser-induced photothermochemical synthesis." Micromachines (2017) 8 (2) 32 (SCIE) [invited paper, featured on cover]
  4. H. Nakajima, D. Lee, M. T. Lee, C. P. Grigoropoulos, "Hydrogen production with CuO/ZnO nanowire catalyst for a nanocatalytic solar thermal steam-methanol reformer." International Journal of Hydrogen Energy (2016) 41 (38) 16927-16931 (SCI)
  5. Y. H. Huang, C. W. Huang, Y. D. Chou, C. C. Ho, M. T. Lee*, "An experimental and numerical study of the thermal issues of a high-speed built-in motor spindle." Smart Science (2016) 1-7 (thesis award invited article) http://www.tandfonline.com/eprint/MSx8PTKHNUU2sczSs3Qe/full
  6. K. S. Yang, W. T. Ding, C. T. Yeh, M. T. Lee*, C. C. Wang. "An experimental and analytical investigation of the photo-thermal-electro characteristics of a high power InGaN LED module." Applied Thermal Engineering, 98 (5) (2016) 756-765  (SCI)
  7. S. L. Tsai, Y. K. Liu, H. Pan, C. H. Liu, M. T. Lee*. "The coupled photothermal reaction and transport in a laser additive metal nanolayer simultaneous synthesis and pattering for flexible electronics." Nanomaterials, 6 (2016) 12 (SCIE)
  8. A. K. Sekone, Y. B. Chen, M. C. Lu, W. K. Chen, C. A. Liu and M. T. Lee*. "Silicon nanowires for solar thermal energy harvesting: An experimental evaluation on the trade-off effects of the spectral optical properties." Nanoscale Research Letters 11 (1) (2016) 1-8 (SCIE)
  9. C. F. Tseng, T. Y. Tsai, Y. H. Huang, M. T. Lee*, R. H. Horng. "Transport phenomena and the effects of reactor geometry for epitaxial GaN growth in a vertical MOCVD reactor." Journal of Crystal Growth  432 (2015) 54-63 (SCI)
  10. A. K. Sekone, Y. Y. Hung, C. T. Yeh, M. T. Lee*. "Experimental study and analysis of porous thin plate drying in a convection dryer." International Communications in Heat and Mass Transfer 68 (2015) 200-207 (SCI)
  11. J. Kwon, H. Cho, H. Lee, S. Hong, Y. D. Suh, H. Moon, D. Kim, J. Cho, M. T. Lee, J. Yeo, S. H. Ko. "Facile photoreduction process for ZnO/Ag hierarchical nanostructured photoelectrochemical cell integrated with supercapacitor." ECS Journal of Solid State Science and Technology  4 (12) (2015) 424-428 (SCI)
  12. K. S. Yang, T. Y. Yang, C. W. Tu, M. T. Lee*. "A novel flat polymer heat pipe with thermal via for cooling electronic devices." Energy Conversion and Management  100 (2015) 37-44 (SCI)
  13. Y.K. Liu, Y.Y. Sie, C.A. Liu, M.T. Lee*. "A novel laser direct writing system integrated with A&F XXY alignment platform for rapid fabrication of flexible electronics." Smart Science 3 (2) (2015) 87-91 (thesis award invited article)
  14. J. Yeo, G. Kim, S. Hong, J. Lee, J. Kwon, H. Lee, H. Park, W. Manoroktul, M. T. Lee, B. J. Lee, C. P. Grigoropoulos, S. H. Ko. "Single nanowire resistive nano-heater for highly localized thermo-chemical reactions: Localized hierarchical heterojunction nanowire growth." Small 10 (24) 5014 (2014) (SCI) [featured on cover]
  15. Y. K. Liu and M. T. Lee*. "Laser direct synthesis and patterning of silver nano/microstructures on a polymer substrate."  ACS Applied Materials & Interfaces 6 (2014) 14576-14582 (SCI)
  16. K. S. Yang, C. H. Chung, C. W. Tu, C. C. Wong, T. Y. Yang, M. T. Lee*. “Thermal spreading resistance characteristics of a high power light emitting diode module.” Applied Thermal Engineering 70 (1) (2014) 361-368 (SCI)
  17. C. H. Chung, K. S. Yang*, K. H. Chien, M. S. Jeng, M. T. Lee*. “Heat transfer characteristics in high power LED packaging.” Smart Science 2 (1) (2014) 1-6  (thesis award invited article)
  18. M. T. Lee*, C. P. Grigoropoulos and R. Greif. “A Study of the transport phenomena in a wall coated micro steam methanol reformer.” International Journal of Hydrogen Energy 39 (2014) 2008-2017 (SCI)
  19. C. Chen, J. T. Teng, C. H. Cheng, S. Jin, S. Huang, C. Liu, M. T. Lee, H. H. Pan and R. Greif. “A study on fluid flow and heat transfer in rectangular microchannels with various longitudinal vortex generators.” International Journal of Heat and Mass Transfer 69 (2014) 203-214 (SCI)
  20. K.S. Yang, C. H. Chung, M. T. Lee, S. B. Chiang, C. C. Wong, C. C. Wang. “An experimental study on the heat dissipation of LED lighting module using metal/carbon foam.” International Communications in Heat and Mass Transfer 48 (2013) 73-79 (SCI)
  21. J. Yeo, S. Hong, D. Lee,  N. Hotz, M. T. Lee,  C. P. Grigoropoulos, S. H. Ko. “Next generation non-vacuum, maskless, low temperature nanoparticle ink laser digital direct metal patterning for a large area flexible electronics.” PLoS ONE  7 (8): e42315 (2012) (SCI)
  22. D. Lee, H. Pan, A. Sherry, S. H. Ko, M. T. Lee, E. KimC. P. Grigoropoulos. “Large-area nanoimprinting on various substrates by reconfigurable maskless laser direct writing.” Nanotechnology 23 (2012) 344012 (SCI)
  23. C. Kullmann, N. C. Schirmer, M. T. Lee, S. H. Ko, N. Hotz, C. P. Grigoropoulos, D. Poulikakos. 3D micro-structures by piezoelectric inkjet printing of gold nanofluids.”Journal of Micromechanics and Microengineering 22 (2012) 055022 (SCI)
  24. M. T. Lee*, D. Lee, A. Sherry and C. P. Grigoropoulos. “Rapid selective metal patterning on polydimethylsiloxane (PDMS) fabricated by capillarity-assisted laser direct write.” Journal of Micromechanics and Microengineering 21 (2011) 095018 (SCI)
  25. T. Xu, N. Zhao, F. Ren, R. Hourani, M. T. Lee, J. Y. Shu, S. Mao, B. A. Helms. “Sub-nanometer porous thin films by the co-assembly of nanotube subunits and block copolymers.” ACS Nano, 5 (2) (2011) 1376-1384 (SCI)
  26. M. T. Lee*, M. Werhahn, D.J. Hwang, N. Hotz, R. Greif, D. Poulikakos, C.P. Grigoropoulos. Hydrogen production with a solar steam-methanol reformer and colloid nanocatalyst.” International Journal of Hydrogen Energy. 35 (2010) 118-126 (SCI)
  27. N. Hotz, R. Zimmerman, C. Weinmueller, M. T. Lee, C. P. Grigoropoulos, G. Rosengarten, D. Poulikakos. “Exergetic analysis and optimization of a solar-powered reformed methanol fuel cell micro-powerplant.”Journal of Power Sources,195 (2010)1676-1687 (SCI)
  28. M. T. Lee*, D.J. Hwang, R. Greif and C.P. Grigoropoulos. Nanocatalyst fabrication and the production of hydrogen by using photon energy.” International Journal of Hydrogen Energy, 34 (2009) 1835-1843 (SCI)
  29. J. S. Suh, M. T. Lee, R. Greif, C.P. Grigoropoulos. ”Transport phenomena in a steam-methanol reforming microreactor with internal heating.” International Journal of Hydrogen Energy, 34 (2009), 314-322 (SCI)
  30. M. T. Lee*, R.Greif, C.P.Grigoropoulos, H.G.Park, F.K.Hsu. “Transport in packed-bed and wall-coated steam-methanol reformers.”Journal of Power Sources,166 (2007)194-20 (SCI)
  31. J. S. Suh, M. T. Lee, R. Greif, C.P. Grigoropoulos “A Study of steam methanol reforming in a microreactor.” Journal of Power Sources, 173 (2007) 458-466 (SCI)
  32. N. Hotz, M. T. Lee, C.P. Grigoropoulos, S. M. Senn, D. Poulikakos. “Exergetic analysis of fuel cell micropowerplants fed by methanol.” International Journal of Heat and Mass Transfer, 49 (2006) 2397-2411 (SCI)


  1. 翁潤群、鍾濟鴻、李明蒼、簡國祥、楊愷祥, "不同LED封裝技術之熱阻特性分析", 台灣熱管理協會季刊 【熱管理產業通訊】2013年11月號第32期
  2. 鍾濟鴻、李明蒼、江松柏、翁震灼、吳世國、楊愷祥, "發泡材料應用於LED散熱模組之熱傳效益分析", 台灣熱管理協會季刊 【熱管理產業通訊】2013年11月號第32期
  3. 洪名杰、徐瑋楊、曾建富、何志成、李明蒼, "工具機結構的多重物理耦合分析", 機械月刊第42卷第3期 2016年3月號
  4. 劉家安、陳冠宏、徐瑋陽、曾建富、李明蒼, "工具機適應式熱平衡技術介紹", 機械新刊2017年第4期工具機專輯
  5. 劉誼凱、李明蒼、黃萌祺、王裕銘. "先進雷射微奈米可撓式電路板製作技術", 機械工業雜誌2017年9月第414期先進製造技術專輯


      1. 李明蒼、劉建宏  「用於製造導電結構的反應墨水以及製造導電結構的方法」   中華民國專利 第I529223號
      2. 李明蒼、陳政雄、何志成、洪名杰 「可改善熱誤差之工具機」  中華民國專利 第 M541358號

Conference Presentations (selected)

  1. Invited Seminar, "Photo-thermal-fluidic transport phenomena in nano-microscales: applications to energy conversion and advanced microfabrication." April 10, 2017, Tokyo University of Science, Japan
  2. M.T. Lee, Y.B. Chen, M.C. Lu, "A Study of Silicon Nanowires for Solar Thermal Energy Harvesting and Utilization." IMECE 2016, Nov. 11-17, 2016, Phoenix, AZ USA
  3. Keynote Speaker, "Photo-thermal Energy Conversion Enhancement and Utilizations Using Nanomaterials." APEnergy 2016, Sep. 4~8, National Tsing Hua University, Hsinchu, Taiwan
  4. M.T. Lee, "Green microfabrication for flexible electronics by laser direct synthesis and pattering technology." SPIE Photonics West, Feb. 13-18, 2016, San Francisco, CA USA.
  5. M.T. Lee, Y.K. Liu. "Microscale heat and mass transport phenomena of laser synthesis and patterning of metal microstructures on a polymer substrate for  flexible electronics." ASME 2016 Micro/Nanoscale Heat and Mass Transfer Inernational Conference, Jan. 4-6, 2016, Biopolis, Singapore.
  6. M.T.Lee, K.S. Yang,  "Thermal Spreading Resistance Characteristics of a High Power Light Emitting Diode Module." ASME IMECE, Nov. 14-20, 2014, Montreal, Canada.
  7. Invited Speaker, 2014 International Workshop on Micro/Nanoscale Heat Transfer and Energy (微奈米尺度熱傳及能源國際工作坊). Nov. 2014, National Cheng Kung University, Tainan City, Taiwan
  8. 洪名杰、何志成、張建宏、李明蒼, "工具機主軸結構熱物理現象分析", 第三十八屆全國力學會議研討會論文, 2014年11月, Taiwan
  9. 劉誼凱、李明蒼, "新型雷射金屬微結構直寫技術運用於可撓性導電基板製造", 第三十八屆全國力學會議研討會論文, 2014年11月, Taiwan
  10. 鍾濟鴻、李明蒼、楊聰義、翁潤群、楊愷祥, "高功率LED模組擴散熱阻特性之研究", 中國機械工程學會第三十屆全國學術研討會論文集, 2013年12月, Taiwan
  11. 曾建富、李明蒼、洪瑞華, "以數值方法研究氮化鎵薄膜之生長", 中國機械工程學會第三十屆全國學術研討會論文集, 2013年12月, Taiwan
  12. 洪昱永、李明蒼, "太陽能乾燥器乾燥速率之研究", 中國機械工程學會第三十屆全國學術研討會論文集, 2013年12月, Taiwan
  13. Invited Speaker, International Workshop on EEWS (Energy, Environment, Water, and Sustainability), KAIST, 2013, Daejeong, Korea
  14.  M.T. Lee. "Solar-Thermal Highly Conversion Efficiency Steam-Methanol Reformer with Nanocatalyst" (poster presentation) 2013 Asia Pacific Clean Energy Summit, Sep. 2013, Honolulu, Hawaii USA
  15.  M.T. Lee. "Solar-Thermal Steam-Methanol Reformer with Nanocatalyst" (poster presentation) 2013 International Hydrogen and Fuel Cells Conference, July 2013, Napa Valley, CA USA
  16. 鍾濟鴻、翁潤群、李明蒼、簡國祥、楊愷祥, "LED封裝方式對熱傳性能之研究", 中國機械工程學會第二十九屆全國學術研討會論文集, 2012年12月, Taiwan
  17. M. T. Lee, N. Hotz, R. Greif, C. P. Grigoropoulos. “Transport Phenomena in a Nanocatalytic Solar thermal Steam-Methanol Reformer.” 2012 International Conference on Hydrogen Production, June 24-27, 2012 Seoul, South Korea
  18. N. Hotz, M. T. Lee, C. P. Grigoropoulos, R. Zimmerman, G. Rosengarten and D. Poulikakos. “Exergetic Analysis of a Solar-Heated Fuel Cell System Fed by Methanol.” ASME 2010 4th International Conference on Energy Sustainability, ES2010-90252, May 17-22, 2010 Phonics AZ, USA
  19. H.G.Park, M.T. Lee, F.K.Hsu, C.P.Grigoropoulos, R.Greif and C.H.Lin. “Transport in a methanol steam reformer as the fuel processor for fuel cell systems.” Proceedings of IMECE 2004, JMECE2004-61 208, Nov. 13-19, 2004 Anaheim CA, USA



     1.   Jyh-tong Teng, Jiann-Cherng Chu, Chao Liu, Tingting Xu, Yih-Fu Lien, Jin-Hung Cheng, Suyi Huang, Shiping Jin,Thanhtrung Dang, Chunping Zhang, Xiangfei Yu, Ming-Tsang Lee, and Ralph Greif. Fluid Dynamics in Microchannels, Fluid Dynamics, Computational Modeling and Applications, ISBN 978-953-51-0052-2 (2012)