1
Chen, J.S., Yuan, J.X., Ni, J., and Wu, S. M., 1992, “Compensation of Non-rigid Body Kinematic Effect on a Machining Center,” Transaction of NAMRI/SME, Vol. 20, pp.325-329 (SCI)
2
Chen, J.S., Yuan, J.X., Ni, J., and Wu, S. M., 1993, “Real-time Compensation of Time-Variant Volumetric Error on a Machining Center,” Transactions of the ASME, Journal of Engineering for Industry, Vol. 115, pp.472-479 (SCI)
3
Chen, J.S., 1995, “Computer-Aided Accuracy Enhancement of Multi-Axis CNC Machine Tool,” International Journal of Machine Tools and Manufacturing, Vol.35, No. 4, pp.593-605 (SCI)
4
Chen, J.S., and Chiou, G., 1995, “Quick Testing and Modeling of Thermally-Induced Errors of CNC Machine Tools,” International Journal of Machine Tools and Manufacturing, Vol. 35, No. 7, pp.1063-1074 (SCI), NSC 83-0422-E194-002
5
Chen, J.S., and Ling, C.C., 1996, “Improving Machine Accuracy through Machine Tool Metrology and Error Corrections,” International Journal of Advanced Manufacturing Technology, Vol. 11, No.3, pp.198-205 (SCI), NSC82-0401-E194-020
6
Chen, J.S., Yuan, J.X., and Ni, J., 1996, “Thermal Error Modeling for Real-Time Error Compensation,” International Journal of Advanced Manufacturing Technology, Vol. 11, No.12, pp.266-275 (SCI)
7
Chen, J.S., 1996, “Neural Network-Based Modeling and Error Compensation of Thermally-Induced Spindle Errors,” International Journal of Advanced Manufacturing Technology, Vol. 11, No.12, pp.303-308 (SCI), NSC82-0422-E194-022
8
Chen, J.S., 1996, “A Study of the Thermally-Induced Machine Tool Errors in Real Cutting Conditions,” International Journal of Machine Tools and Manufacturing, Vol.36, No.12, pp. 1401-1411, 1996 (SCI), NSC84-2212-E194-012
9
Chen, J.S., 1997, “Fast Calibration and Modeling of Thermally-Induced Machine Tool Errors in Real Machining,” International Journal of Machine Tools and Manufacturing, Vol.37, No.2, pp.159-169, 1997 (SCI), NSC85-2212-E194-013
10
Yau, H. T., and Chen, J. S., 1997, “Reverse Engineering of Complex Geometry using Rational B-Splines,” International Journal of Advanced Manufacturing Technology, Vol. 13, pp.548-555, 1997 (SCI)
11
Chen, J. S., Kou, T. W., and Chiou, S. H., 1999, “Geometric Error Calibration of Multi-Axis Machines Using an Auto-Alignment Laser Interferometer,” Journal of the American Society for Precision Engineering. Vol.23, No.4, pp.243-252, Oct. 1999, (SCI), NSC86-2212-E194-006
12
Chen, J.S., and Dwang, I.C., 2000, “A Ballscrew Drive Mechanism with Piezo-Electric Nut for Preload and Motion Control,” International Journal of Machine Tools and Manufacture, Vol.40, NO.4, pp.513-526, 2000, (SCI), NSC87-2212-E194-006
13
Chen, Jenq-Shyong, Chen, Kuo-Chen, Lai, Zhang-Chan, and Huang, Yong-Kuo, 2003, “Friction Characterization and Compensation of a Linear-Motor Rolling-Guide Stage,” International Journal of Machine Tools and Manufacture, Vol. 43, pp 905 – 915, July 2003, (SCI), NSC89-2212-E-194-033.
14
Chen, Jenq-Shyong and Hsu, Wei-Yao, 2003, “Characterizations and Models for the Thermal Growth of a Motorized High Speed Spindle,” International Journal of Machine Tools and Manufacture, Vol. 43, pp 1163-1170, September 2003, (SCI), NSC90-2212-E194-003.
15
Chen, Jenq-Shyong and Hsu, Wei-Yao, 2004, “Design and Analysis of a Tripod Machine Tool with an Integrated Cartesian Guiding and Metrology Mechanism,” Precision Engineering, Volume 28, Issue 1 , January 2004, Pages 46-57
16
Chen, Jenq-Shyong, Huang, Yong-Kuo, and Chin-Chun Cheng, 2004, “Mechanical Model and Contouring Analysis of the High-Speed Ballscrew Drive Systems with Compliance Effect,” International Journal of Advanced Manufacturing Technology, Volume 24, Numbers 3 , August 2004 , 241 - 250 , (SCI), NSC88-2622-E-194-003.
17
Hsu, Wei-Yao, and Chen, Jenq-Shyong, 2004, “Error Analysis and Auto-Calibration for a Cartesian-Guided Tripod Machine Tool,” International Journal of Advanced Manufacturing Technology, Volume 24, Numbers 11-12, December 2004, 899 - 909 , (SCI), NSC89-2212-E-194-024-
18
Chen, Jenq-Shyong, Huang, Yung-Kuo and Chen, Mao-Son, 2005, “Feedrate Optimization and Tool Profile Modification for the High-Efficiency Ball-End Milling Process,” International Journal of Machine Tools and Manufacture , Vol. 45 (2005) 1070-1076, (SCI), NSC91-2622-E-194-007-CC3
19
Chen, Jenq-Shyong, Huang, Yung-Kuo and Chen, Mao-Son, 2005, “A Study of the Surface Scallop Generating Mechanism in the Ball-End Milling Process,” International Journal of Machine Tools and Manufacture, Vol. 45 (2005) 1077-1084, (SCI), NSC91-2622-E-194-007-CC3
20
Chen, Jenq-Shyong, and Chen, Kwan-Wen, 2005, “Bearing load analysis and control of a motorized high speed spindle,” International Journal of Machine Tools and Manufacture, Vol. 45(2005) 1487-1493, (SCI), NSC91-2212-E-194-028
21
Chen, Jenq-Shyong, and Hsu, Wei-Yao, 2006, “Dynamic and Compliant Characteristics of a Cartesian Guided Tripod Machine Tool,” ASME Transactions, Journal of Manufacturing Science and Engineering, May 2006, p.494-502(SCI), NSC89-2212-E-194-024.
22
Chen, Jenq-Shyong, and Hwang, Yii-Wen, 2006, “Centrifugal Force Induced Dynamics of a Motorized High-Speed Spindle,” International Journal of Advanced Manufacturing Technology (2006) 30:10-19 , (SCI), NSC91-2212-E-194-028
23
Chen, Jenq-Shyong, Kuo, Yao-Hung, and Hsu, Wei-Yao, 2006, “The Influence of Friction to the Contouring Accuracy of a Cartesian Guided Tripod Machine Tool,” International Journal of Advanced Manufacturing Technology (2006) 30:470-478 , (SCI), NSC89-2212-E-194-024.
24
Chou, Xiang-Rui, Wang, Jia-Xing, and Chen, Jenq-Shyong, “Laser direct writing of diamond micro-nozzle using Q-switched Nd-YAG laser,” Journal of the Chinese Society of Mechanical Engineers, 29/4, 2008, p.289-297, (EI)
25
Chen, Kuan-Chou, Hu, Chin-Yu and Chen, Jenq-Shyong, “Dynamic Interaction of a Distributed Guideway and a Asymmetrical Magnetically Suspended Vehicle With Unbalanced Mass,” Journal of the Chinese Society of Mechanical Engineers, 29/6, 2008, (EI)
26
Chen, Kuan-Chou, Hu, Chin-Yu and Chen, Jenq-Shyong, “Dynamic Interaction of a High-Speed Multimagnet Suspension Vehicle and a Distributed Discretely Supported Guideway,” Journal of the Chinese Society of Mechanical Engineers, 30/1, 2009, (EI)
27
Hu, Chin-Yu, Chen, Kuan-Chou, and Chen, Jenq-Shyong, “Dynamic Interaction of a High-Speed Vehicle and a Distributed Discretely Supported Guideway,” Journal of Mechanics, 2009, (SCI), Accepted
28
Hu, Chin-Yu, Chen, Kuan-Chou, and Chen, Jenq-Shyong, “"Dynamic Interaction of a Distributed Supported Guideway and a Asymmetrical Multimagnet Suspension Vehicle with Unbalanced Mass,” Journal of Mechanics, 2009, (SCI), Accepted
1
Chen, J.S., Yuan, J.X., Ni, J., and Wu, S. M., 1991, “Real-time Compensation of Time-Variant Volumetric Error on a Machining Center, ” ASME Winter Annual Meeting
2
Chen, J.S., Yuan, J.X., Ni, J., and Wu, S. M., 1992, “Thermal Error Modeling for Volumetric Error Compensation, ” ASME Winter Annual Meeting
3
陳政雄、鄭富榮，1993， “綜合加工機主軸熱變形之即時補償”，中國機械工程學會第十屆學術研討會，交通大學
4
陳政雄、蔡德輝，1993， “CNC工具機動態輪廓誤差之檢測與改善”，中國機械工程學會第十屆學術研討會，交通大學
5
Chen, J.S., 1993, “Computer-Aided Accuracy Enhancement of Multi-Axis CNC Machine Tool”, 1993 Sino-German Joint Symposium on Precision and High Speed Manufacturing Technology, Taipei, Taiwan、Chen, J.S., and Ling, C.C., 1994, “Improving the Machine Accuracy through Machine Tool Metrology and Error Corrections”, American Society for Precision Engineering Annual Meeting
6
陳政雄、蔡坤妙，1994， “電腦輔助工具機誤差量測與補償”，中國機械工程學第十一屆學術研討會，中興大學
7
陳政雄、林呈彰，1994， “CNC工具機定位精度之軟體式誤差補償”，第15屆中美近代科技研討會，台北
8
Chen, J.S., 1995, “Accuracy Enhancement of Multi-Axis Machine Tools using Real-Time Error Compensation”, 8th International Precision Engineering Seminar, France
9
Chen, J.S., 1995, “Calibration and Accruacy Enhancement of a Machining Center through Error Corrections”, International Conference on Precision Engineering ’95 (2nd ICMT), Singapore
10
Yau, H.T., and Chen, J.S., 1995, “CMM Digitization and Geometric Modeling of Engine Intake Block”, International Conference on Precision Engineering ’95 (2nd ICMT), Singapore
11
林呈彰、陳政雄、陳明豐，1995， “Introduction to Theory and Application of Damping Device for Turning Process”，中國機械工程學會第十二屆學術研討會，中正大學
12
Ling, C.C., Chen, J.S., and Morse, I.E., 1995, “An Experimental Investigation of Damping Effects on a Single Point Cutting Process”, ASME Winter Annual Meeting, San Fransisco, USA
13
陳政雄、林呈彰、蕭庭郎、劉嘉峰，1995， “工具機高速主軸之技術發展”，中國機械工程學會第十二屆學術研討會，中正大學
14
陳政雄，1995， “Calibration and Modeling of Thermally-Induced Machine Tool Errors in Real Machining”，中國機械工程學會第十二屆學術研討會，中正大學
15
Yau, H.T., and Chen, J.S., 1996, “Surface Approximation and Automatic Generation of Complex Geometric Model from Laser Scan Data”, 1996 American Society for Precision Engineering Annual Meeting，Monterey, California
16
林呈彰、陳政雄、廖俊雄，1996， “鋁合金高速切削對表面精度影響之研究”，中國機械工程學會第十三屆學術研討會，台灣大學
17
陳政雄、林呈彰，1996， “高速主軸軸承預壓之壓電式控制”，中國機械工程學會第十三屆學術研討會，台灣大學
18
Chen, J. S., 1997, “An Auto-Alignment Laser Interferometer for Diagonal Measurement of Multi-axis Machine Tool”, 9th International Precision Engineering Seminar, May, 26~30, 1997, Braunschweig, Germany
19
Chen, J. S., 1997, “Geometric Error Calibration of Multi-axis Machines using an Auto-Alignment Laser Interferometer”, Asia-Pacific Symposium on Instrumentation, August, 25-31, 1997, Huangshan, China
20
陳政雄、周生華, 1997， “Geometric Error Calibration of Multi-axis Machines using an Auto-Alignment Laser Interferometer”, 中國機械工程學會第十四屆學術研討會，中央大學
21
林呈彰、陳政雄、王惟正、陳明豐，1997，“主動式與被動式顫振控制合成效應之探討”, 中國機械工程學會第十四屆學術研討會，中央大學.
22
Chen, J. S.,1997, “Geometric Error Calibration of Multi-axis Machines using an Auto-Alignment Laser Interferometer”, 1997 Annual Meeting of the American Society for Precision Engineering, Oct. 5-10, 1997, Norfolk, Virginia
23
Chen, J. S., “Active Bearing Preload Control of a High Speed Spindle Using Piezoelectric Actuators”, 3rd International Conference on Precision Engineering, Nov. 18-20, 1997, Taipei, Taiwan, R.O.C
24
黃永國、陳政雄，1998，“球形端銑刀切削殘留分析”, 中國機械工程學會第十五屆學術研討會，成功大學
25
Chen, J. S., 1998, “Active Bearing Preload Control of a High Speed Spindle Using Piezoelectric Actuators”, 13th Annual Meeting of American Society for Precision Engineering, Oct. 25-30, 1998, St. Louis, Missouri.
26
Chen, J. S., 1998, “A Piezo-electric-nut for Preload and Positioning Control of High-speed and Ultra-precision Positioning Stages, ” 1998 International Conference on Mechantronic Technology (ICMT’98), Nov.30-Dec.2, 1998, Hsinchu, Taiwan.
27
Chen, J. S., 1999, “The Development of a High-Speed Spindle for Machining Center”, 1999 Sino-German Joint Symposium on High Speed and High Precision Machining, March 15-16, 1999, Tainan, Taiwan
28
鄭中緯、陳政雄，1999，“並聯機構平台機構參數自我校正之研究”, 中國機械工程學會第十六屆學術研討會，清華大學
29
Chen, J. S., 1999, “The Development of a High-Speed Spindle for Machining Center”, International Conference on Advanced Manufacturing Technology, June 16-18, 1999, Xi’an, China
30
Chen, J. S., 1999, “Geometric error analysis and calibration of a Stewart platform”, 14th Annual Meeting of American Society for Precision Engineering, Oct.31-Nov. 5, 1999, Monterey, California, USA
31
Chen, J. S., 2000, “Design and Application of High Speed Spindles for Machine Tools,”, International Conference on Frontiers of Design and Manufacturing, June 17-19, 2000, Zheijang University, Hangzhou, China
32
陳政雄、陳春志，2000，“CNC高速進給系統之動態輪廓運動分析”, 第一屆海峽兩岸製造技術研討會，台灣大學，2000/1/18-19
33
Chen, J. S., 2001, “Dual-Mode Friction Compensation of a Precision Linear-Motor Rolling-Guide Stage,” 2nd International Conference of European Society for Precision Engineering and Nanotechnology, May 26-30, 2001, Turin, Italy
34
Chen, J. S., 2001, “Some Issues of the Ball Bearing Motorized Spindle,” 2001 Summer Topical Meeting of the American Society for Precision Engineering, Precision Bearings and Spindle, June 18-19, 2001, State College, Pennsylvania
35
Chen, J. S. and Huang ,Y.K., 2001, “Modeling and Contouring Error Analysis of a High-Speed Ballscrew Drive System with Compliance Effect,” Third International Conference on Metal Cutting and High Speed Machining, June 27-29, 2001, Metz, France
36
黃永國、陳政雄，2001，“高速滾珠螺桿進給系統之動態輪廓誤差分析”, 第十二屆全國自動化科技研討會，虎尾技術學院，2001/5/25-26
37
Chen, J. S., 2001, “Geometric Error and Stiffness Analysis of a New Kind of Parallel-Link Tripod Machine Tool,” 6th International Conference on Manufacturing Technology, Dec. 16-18, 2001, Hong Kong
38
Chen, J.S., 2002, “Low Speed Tracking Control of a Precision Linear-Motor Rolling-Guide Stage ,” 3rd International Conference of European Society for Precision Engineering and Nanotechnology, May/26-30, 2002, Eindhoven, Netherlands
39
Chen, J.S. and Hsu, W. Y., 2002, “Kinematic and Stiffness Analysis of a Novel Ortho-Guided Tripod Machine Tool, ” 17th Annual Meeting of American Society for Precision Engineering, Oct.20-25, 2002, St. Louis, Missouri, USA
40
張萬欽、簡國諭、陳政雄, 2002，“超音波振動輔助車削電腦模擬與分析” ,中國機械工程學會全國學術研討會，2002年，11月
41
Chen, Jenq-Shyong ,Hsu, Wei-Yao, “Kinematic Analysis and Comparison of Ortho-Guided Tripod (OGT) Machine”, 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-Yi, Taiwan
42
Chen, Jenq-Shyong, Chou, Xiang- Rui, “A Study of The Hybrid Aerostatic- and Aerodynamic- Bearing”, 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-Yi, Taiwan
43
Jenq-Shyong Chen, Zhang Chan Lai, Yong-Kuo Huang, “Low Speed Tracking Control of a Precision Linear-Motor Rolling-Guide Stage”, 2002 IEEE/ASME International Conference on Advanced Manufacturing Technologies and Education in the 21st Century, Chia-Yi, Taiwan
44
Chen, J.S., 2003, “Mechanical Model and Simulation of the Ultrasonic Vibration Assisted Turning Process,” International Topical Conference on Precision Engineering, Micro Technology, Measurement Techniques and Equipments of the European Society for Precision Engineering and Nanotechnology, May 19-20, 2003, Aachen, Germany
45
陳政雄、許巍耀，2003，“Design and analysis of a Tripod machine tool with an integrated Cartesian guiding and metrology mechanism”, 第三屆海峽兩岸製造技術研討會，台灣科技大學，2003/2/24-25
46
張佑華、陳政雄，2003，“Ka頻段之微機電微波率波器”, 第二十屆中國機械工程學會，台灣大學，2003/12/5-6
47
Hsu, W. Y., and Chen, J.S., 2003, “Dynamic Model and Servo Control of the Cartesian Guided Tripod Machine,” ICMT 2003, December, Taipei, Taiwan
48
Huang, Y. K. and Chen, J.S., 2004, “An image-based virtual confocal pinhole technology for 3D surface measurement,” The 2nd International Symposium on Precision Mechanical Measurements, 2004/08/24, Beijing, China
49
黃凱、陳政雄，2004，“光學同調斷層掃瞄系統的光程調製機制之研究”, 第四屆全國自動化光學檢測技術論壇與展覽，新竹交通大學，2004/10/28
50
黃永國、陳政雄，2004，“運用多層二維影像反捲積實現三維表面量測”, 第四屆全國自動化光學檢測技術論壇與展覽，新竹交通大學，2004/10/28
51
Chen, J.S., and Huang, Y.K., “High-speed subsurface microstructure measurement using optical coherence tomography,” 第一屆海峡两岸实验力学研讨会，2005年7月30日-8月1日 北京
52
Chou, X.R., Wang, J.X., and Chen, J.S., “Micro-structuring of single crystal diamond using Nd-YAG laser,” 7th International Conference on Frontiers of Design and Manufacturing, Guangzhou, China, June 19-22, 2006
53
黃永國、陳政雄，2006，“偏極化光學同調斷層掃瞄技術於表面下缺陷與應力測量, 第六屆全國自動化光學檢測技術論壇與展覽，新竹交通大學，2006/10
54
蘇柏仰、陳又誠、陳政雄, “無線式表面聲波感測器在轉動軸扭矩之應用,” 第十屆車輛工程研討會, 彰化大葉大學，2006/10
55
Chen, J.S., and Hunag, Y.K., "A polarized low coherence interference microscope for the effect and birefringence mapping of the intra-interfaces," 第二屆海峡两岸实验力学研讨会，2007年7月，成功大學
56
Chen, J.S., "Full-Field Mapping of the Stress-Induced Birefringence on the Internal Interfaces Using a Polarized Low Coherence Light Interference Microscope," 13th International Conference on Experimental Mechanics (ICEM13), Alexandroupolis, Greece, July 1-6, 2007
57
Chen, J.S., and Huang, Y.K., “Full-field mapping of the stress-induced birefringence using a polarized low coherence interference microscope,” ISIST2008, 5th International Symposium On Instrumentation Science And Technology, September 15~18，2008, Shenyang，China
58
陳韋志、陳政雄、胡紹俊、羅民芳, “應用軟性壓印法製作奈米碳管紅外光感光元件,” 第二十五屆機械工程學會,大葉大學,2008/11
59
簡良翰、陳政雄、胡紹俊、羅民芳, “可撓性氧化鋅壓電感測器之製作,” 第六屆全國精密製造研討會，崑山科技大學，台南，2008/11/8
60
華建鈞、陳政雄, “臥式綜合加工機熱誤差之量測與補償,” 第二十五屆機械工程學會,大葉大學,2008/11
61
陳輝憲、陳政雄、鄭中緯、呂育廷, “皮秒雷射應用於多晶化氧化銦錫之圖案技術,” 第二十五屆機械工程學會,大葉大學,2008/11
62
Cheng, C.W., Chen, J.S., Lee, Y.L., Shen, W.C., Chien, C.W., and Chen, H.H., "Laser-induced crystallization of amorphous indium tin oxide film on glass substrate for patterning application," The 5th International Congress on Laser Advanced Materials Processing, Kobe, Japan, June/29~July/2, 2009
63
Cheng, C.W., Chen, J.S., Lee, Y.L., Shen, W.C., and Chien, C.W., "Micro patterning of a crystalline structure on a-ITO film deposited on plastic with 1kHz femtosecond laser pulses," The 5th International Congress on Laser Advanced Materials Processing, Kobe, Japan, June/29~July/2, 2009
64
Cheng, C.W., Chen, J.S., Lee, P.X., and Chien, C.W., "Fabrication of microstructures on photosensitive glass using femtosecond laser processing and chemical etching," The 5th International Congress on Laser Advanced Materials Processing, Kobe, Japan, June/29~July/2, 2009
65
Chen, J.S., and Chiou, C.Y., “Polarized multi-color digital holographic microscope for contour surface measurement,” 第三屆海峡两岸实验力学研讨会，2009年7月30日-8月1日, 內蒙古工業大學
66
Chen, J.S., and Lai, C.H., "Modeling and compensation for the dynamically thermal errors of a high speed spindle," 現代精度理論及應用學術研討會，2009年8月25-26, 新竹，台灣
