陳志敏(Jerry M. Chen) 教授

電話

04-22840433 ext.312

傳真

04-22877170

E-mail

jerryc@dragon.nchu.edu.tw
學歷

/肄業學校

國別

主修學門系所

學位

起訖年月

University of Arizona

美國

機械工程系所

博士

1988

與專長相關之經歷

服務機關

服務部門系所

職稱

國立中興大學

機械工程學系

教授

國立中興大學

機械工程學系

副教授

專長

微流體元件系統

系統動力學

動態系統

研究方向

1.Microfluidics visualization measurements for biological and biochemical applications.

2.Generation and measurements of droplets and bubbles.

3.Process of Chemical Mechanical Polishing (CMP) applied to wafers and others.

教授課程

大學部

熱傳學、系統動力學、機械設計與製作專題

研究所

動態系統、流體力學導論

研究計畫(Research Projects)

A. 近年國家科學委員會輔助研究計畫

計畫名稱

起訖年月

擔任工作

利用梳狀流道分離捕捉及操控單一顆粒之實驗研究(II) (102-2221-E-005-034-))

2013/08/01~2014/07/31

主持人

滑動面機械加工紋理之摩擦特性探討(102-2221-E-005-023-)

2013/08/01~2014/07/31

主持人
利用梳狀流道分離捕捉及操控單一顆粒之實驗研究(101-2221-E-005-018-)

2013/08/01~2014/07/31

主持人
球閥之金屬密封元件設計分析與量測(101-2622-E-005-003-CC2) (產學合作計畫-開發型)

2012/02/01~2013/01/31

主持人
旋轉碟片微流道生成微液滴混合反應之可視化實驗與分析(II) (99-2221-E-005-028-)

2010/08/01~ 2011/11/31

主持人
龍頭花灑分水器引生水錘效應之探討與改善(99-2622-E-005-011-CC3) (產學合作計畫-應用型) 2010/06/01 ~ 2011/05/31 主持人
旋轉碟片微流道生成微液滴混合反應之可視化實驗與分析(98-2221-E-005-057-) 2009/08/01 ~ 2010/07/31 主持人
旋轉碟片之兩相微流場可視化實驗研究:血液沉降分離與混合標定(97-2221-E-005-040-) 2007/08/01 ~ 2008/07/31 主持人
製作於旋轉碟片上之兩相微流場可視化實驗研究(96-2221-E-005-072-) 2006/08/01 ~ 2007/07/31 主持人
旋轉微流道快速混合之可視化量測實驗(2/2)(95-2221-E-005-090-) 2006/08/01 ~ 2007/07/31

主持人

吸氣式安全氣囊充氣器之模組設計及開發(94-2622-E-005-024-CC3) (產學合作計畫-應用型) 2005/11/01 ~ 2006/10/31

主持人

旋轉微流道快速混合之可視化量測實驗(1/2)(94-2212-E-005-017-) 2005/08/01 ~ 2006/10/31

主持人

B. 近年其他機構補助研究計畫

計畫名稱

補助或委託機構

起訖年月

擔任工作

球閥之金屬密封元件設計分析與量測(NSC 101-2622-E-005-003-CC2合作企業部分) (產學合作計畫-開發型) 緯凡金屬股份有限公司

2012/2/1~2013/1/31

主持人

龍頭花灑分水器引生水錘效應之探討與改善(99-2622-E-005-011-CC3合作企業部分)(產學合作計畫-應用型)

成霖企業股份有限公司

2010/06/01~ 2011/05/31

主持人
微流口實驗分析與壓縮室最佳模擬 財團法人工業技術研究院

2006/07/01 ~2006/12/15

主持人

 

 

論文發表 (Publications)

A. 期刊論文

1.         J. M. Chen, P.-C. Hunag, and M.-G. Lin, 2008, “Analysis and Experiments of Capillary Valves for Microfluidics on a Rotating Disk,” Microfluidics and Nanofluidics, Vol. 4, pp. 427-437 (SCI)

2.         J. M. Chen, C.-Y. Chen, and C.-H. Liu, 2008, “Pressure Barrier in an Axisymmetric Capillary Microchannel with a Sudden Expansion,” Japanese Journal of Applied Physics, Vol. 47, No. 3, pp. 1683-1689. (SCI)

3.         J. M. Chen, M.-C. Kuo, and Chien-Po Liu, 2011, “Control of Droplet Generation in Flow-Focusing Microfluidic Device with a Converging-Diverging Nozzle Shaped Section,” Japanese Journal of Applied Physics, Vol. 50, No. 10, pp. 107301-(1-7) (SCI).

4.         Huan Chao Chiu, and Jerry M. Chen* (2011). Enhancement of Fluid Mixing in a Double T-shaped Micromixer by Periodic Disturbances of Pressure. Advanced Materials Research, Vol. 339, pp. 118-123. (EI).

5.         Huan Chao Chiu, and Jerry M. Chen* (2012). Numerical Study of Fluid Mixing in a Microchannel with a Circular Chamber on a Rotating Disk. Advanced Materials Research, Vols. 542-543, pp. 1113-1119. (EI).

6.         Huan-Chao Chiu, Jeng-Wen Lai, and Jerry M. Chen* (2012). Mixing Enhancement in Microchannels by Periodic Pressure Disturbances. Journal of Aeronautics, Astronautics and Aviation, Series A, Vol. 44, No. 2, pp. 095 - 102. (EI).

7.         Jerry Min Chen*, Yu-Jen Chen and Lung-Sheng Tseng (2013). Micromixing of Fluids within Droplets Generated on Centrifugal Microfluidics. JSME Journal of Fluid Science and Technology, Vol. 8, No. 2, pp. 200-207.

B. 研討會論文

a.     國外會議論文

1.         J. M. Chen, C. W. Hsu, S.-C. Huang, Visualization of Fluid Mixing in U-shaped Microchannels on a Rotating Disk,” Proceedings of the 19th International Symposium on Transport Phenomena, 17-20 August, 2008, Reykjavik, Iceland.

2.         J. M. Chen, M.-C. Kuo, “Generation and Control of Ddroplet in Cross Microchannel Flow with a Converging-Diverging Nozzle Shaped Section,” Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 12-14, 2010, Paper ESDA2010-24012.

3.         J. M. Chen, and C.-P. Liu “Simulations of Droplet Emulsion in Microfluidics of Flow-focusing and T-junction Geometries,” Proceedings of the 22nd International Symposium on Transport Phenomena, Delft, The Netherlands, Novemer 8-11, 2011.

4.        J. M. Chen, Y.-J. Chen, and L.-S. Tseng, “Micromixing of Fluids within Droplets Generated on Centrifugal Microfluidics,” The Ninth International Conference on Flow Dynamics (ICFD2012), Sendai, Japan, September 19-21, 2012, Paper GS1-13.

b.     國內會議論文

5.         H.-C. Chiu, J.-Y. Chen, J. M. Chen, “Visualization of Fluid Mixing in a Microchamber on a Rotating Disk,” Proceedings of MNHT2008 Micro/Nanoscale Heat Transfer International Conference, January 6-9, 2008, Tainan, Taiwan. 計畫編號:NSC-95-2212-E-005-090

6.         J. M. Chen, W.-J. Tsai, K.-J. Yen, “Biased Split of Fluid Filling in Microfluidics on a Rotating Disk,” Proceedings of 2008 AASRC Conference, Dansui, Taiwan, December 6, 2008. 計畫編號:NSC 96-2221-E-005-072.

7.         陳炯翰,劉忠敏,陳志敏, “旋轉微流道內兩相流之動態數值模擬,” Proceedings of 2008 AASRC Conference, Dansui, Taiwan, December 6, 2008. 計畫編號:NSC 96-2221-E-005-072.

8.         林祐駿郭名哲,陳志敏, “T型微流道乳化液滴生成與控制之研究, Proceedings of 25th CSME National Conference, Changhua, Taiwan, October 21-22, 2008. 計畫編號:NSC 96-2221-E-005-072.

9.         劉忠敏,劉建伯,陳志敏, “T 型流道中微流體乳化現象數值模擬與分析,” Proceedings of 2009 Computational Fluid Dynamics Conference in Taiwan16屆全國計算流體力學學術研討會, Yilan,Taiwan, July 31-August 1, 2009. 計畫編號:NSC-97-2221-E-005-040.

10.     郭名哲,黃夙黛,陳志敏, 十字噴嘴型微流道生成乳化液滴可視化實驗, Proceedings of 26th CSME National Conference, Tainan, Taiwan, October 20-21, 2009.

11.     志敏,梁博欣, 血液於旋轉微流道晶片沉降分離與型態之可視化實驗, Proceedings of 2009 AASRC/CSCA Joint Conference, Taipei, Taiwan, December 12, 2009.

12.     黃韋翔,簡百駿,陳志敏,用梳狀微流道分離微顆粒之設計與可視化實驗,” Proceedings of 2009 AASRC/CSCA Joint Conference, Taipei, Taiwan, December 12, 2009.邱煥釗,陳志敏,週期性干擾T型微流道流體混合之模擬分析,” Proceedings of 26th CSME National Conference, Tainan, Taiwan, October 20-21, 2009.

13.     劉建伯,陳志敏, 比較流體聚焦與T型微流道生成乳化液滴之數值模擬,” Proceedings of 2010 AASRC Conference, Taoyuan, Taiwan, December 4, 2010.煜壬,陳志敏,“利用流體聚焦生成微液滴之混合反應實驗,” Proceedings of 2010 AASRC Conference, Taoyuan, Taiwan, December 4, 2010.簡百駿,曾隆盛,陳志敏,“利用雙十字型微流道交替生成乳化液滴可視化實驗,”  Proceedings of 27th CSME National Conference, Taipei, Taiwan, December 10-11, 2010, Paper AA03-018.

14.     陳煜壬,曾隆盛,陳志敏,旋轉微流道生成液滴混合反應之實驗研究,” Proceedings of 2011 AASRC Conference, Taichung, Taiwan, November 5, 2011. 計畫編號:NSC-99-2221-E-005-028.

15.    曾隆盛,陳志敏,“利用微流道生成膠珠與封裝顆粒之實驗研究,”  Proceedings of 28th CSME National Conference, Taichung, Taiwan, December 10-11, 2011, Paper E05-004.

16.    林聖家,蔡惟亘,陳志敏,“微流道生成液滴之阻抗量測,Proceedings of 29th CSME National Conference, Koahsiung, Taiwan, December 7-8, 2012.

17.     高睿廷,羅永儒,陳志敏,“旋轉碟片上流體聚焦流道生成微氣泡之可視化實驗,” Poceedings of 2012 AASRC Conference, Hsinchu, Taiwan, December 15, 2012. Paper 02-14.

18.     *Wei-Hsiang Huang, Wei-Hsuan Tsai, Jerry M. Chen*, “Separation of Microparticles in Comb-like Microchannels with Different Inlet Arrangements, ” Proceedings of 12th Asian Symposium on Visualization, Tainan, Taiwan, May 19-23, 2013, Paper ASV12-124.

19.     Huan-Choa Chiu, Jerry M. Chen *, “Coriolis Induced Vortices in Centrifugal Microfluidics for Enhancing Mixing,” Proceedings of 20th National Computational Fluid Dynamics Conference, Nantou, Taiwan, August 21-23, 2013.

20.   蔡惟亘,洪國翰,陳志敏, 利用梳狀流道分離捕捉及操控單一顆粒之實驗研究,” Poceedings of 2013 AASRC Conference, Tamsui, New Taipei City, November 30, 2013. Paper 13-04.

21. 莊文嘉,洪國翰,鍾官榮,吳嘉哲,陳志敏, ”球閥之金屬密封元件設計分析與量測,” Proceedings of 30th CSME National Conference, Ilan, Taiwan, December 6-7, 2013.