1
K.-J. Fann, C.-H. Chang , Deep Drawing of a Ni-Ti Shape Memory Alloy Sheet, MATEC Web Conf., 207 (2018), 03020, MOST 104-2221-E-005-022.
2
K.-J. Fann, J.-Y. Su, C.-H. Chang, Formability of Annealed Ni-Ti Shape Memory Alloy Sheet, IOP Conf. Ser.: Mater. Sci. Eng., 324 (2018) 012038, MOST 105-2221-E-005-029.
3
K.-J. Fann, C.-Y. Lin, Y.-J. Chen, Finite Element Analysis of Rolling Process to Locally Thin Metal Strips, Materials Science Forum, 920 (2018), 10-15, MOST 104-2622-E-004-016-CC3.
4
K.-J. Fann, C.-F. Yu, C.-H. Chang, Analysis of Dieless Drawing to Form the End of Metal Wires under Proportional Shape Evolution with Slab Method, Materials Science Forum, 920 (2018), 155-160.
5
K.-J. Fann, J.-Y. Su, Cold Forming of Ni-Ti Shape Memory Alloy Sheet, IOP Conf. Ser.: Mater. Sci. Eng., 317 (2018) 012079, MOST 104-2221-E-005-022.
6
K.-J. Fann, C.-C. Chen, Grain Size in Aluminum Alloy 6061 under Hot Ring Compression Test and after T6 Temper, Applied Sciences, 7, 2017, 372, doi:10.3390/app7040372.
7
K.-J. Fann, H. Eratz, Computer Aided Design of Cross Wedge Rolling a Preform for Forging of Slender Parts, Forging, 24(4), 2015, 19-23 (in Chinese).
8
K.-J. Fann, P.-M. Huang, Cold Bending a Ni-Ti Shape Memory Alloy Wire, Key Engineering Materials, 661, 2015, 98-104, NSC 99-2221-E-005-017.
9
K.-J. Fann, H.-C. Hsu, Hot Forming a V-Shaped Ni-Ti Shape Memory Alloy Wire, Key Engineering Materials, 626, 2015, 377-382, NSC 98-2221-E-005-008.
10
K.-J. Fann, W.-A. Lai, Finite Element Analysis of Forging Encapsulated Metal Composites into Counter Sunk Studs, Forging, 24(2), 2015, 13-18, MOST 102-2221-E-005-022 (in Chinese).
11
K.-J. Fann, H.-C. Hsu, Thermomechanical Forming of NiTi Shape Memory Alloy Wire, Advanced Materials Research, 939, 2014, 430-436, NSC 98-2221-E-005-008.
12
K.-J. Fann, H.-C. Hsu, P.-M. Huang, Study on Thermomechanical V-Shaped Bending and Shape Memory Effect of Ni-Ti Shape Memory Alloy Wires, Forging, 23(1), 2014, 34-39, NSC 98-2221-E-005-008 (in Chinese).
13
K.-J. Fann, L.-H. Peng, Finite Element Analysis of Bulk Forming Encapsulated Metal Composites, Forging, 22(4), 2013, 13-19, NSC 100-2221-E-005-010 (in Chinese).
14
K.-J. Fann, J.-T. Hsieh, Computer Aided Design and Analysis of Roll Forging a Preform for Forging Curved and Slender Parts, Forging, 22(3), 2013, 24-31, NSC 100-2622-E-005-012-CC3 (in Chinese).
15
K.-J. Fann, J.-T. Hsieh, Computer Aided Design and Analysis of Roll Forging a Preform for Forging of Connecting Rods, Forging, 21(2), 2012, 21-27, NSC 99-2622-E-005-018-CC3 (in Chinese).
1
K.-J. Fann, W.-K. Lu, Shearing of Roll Formed U-Shaped Profiles, The 22nd International Conference on Advances in Materials &Processing Technologies (AMPT 2019), Taipei, Taiwan, ROC, 2019, MOST 106-2622-E-005-016-CC3.
2
K.-J. Fann, H.-Y. Hsieh, H. Eratz, B.-H. Peng, Die Design Procedure to Roll Forge a Dog-Bone Shaped Round Bar, Porceedings of the 2nd Asian Pacific Symposium on Technology of Plasticity (APSTP 2019), Tokyo, Japan, 2019, MOST 108-2918-I-005-008.
3
K.-J. Fann, M. Liewald, K. Riedmüller, R. Radonjic, C. Karadogan, Finite Element Study on Sheet Metal
Forming with an Elastic Blankholder Supported by Individual Length-Adjustable Pins, Proceedings of the 2nd Asian Pacific Symposium on Technology of Plasticity (APSTP 2019), Tokyo, Japan, 2019, MOST 108-2918-I-005-008.
4
K.-J. Fann, H.-Y. Hsieh, H. Eratz, Study on Design of a Two-Pass Roll Forging Process for a Round Bar, Annual Meeting of Taiwan Forging Association, Taichung, Taiwan, 2018 (in Chinese).
5
K.-J. Fann, J.-M. Zhang, H.-Y. Hsu, B.-H. Peng, C.-H. Chang, C.-Y. Wong, W.-K. Lu, Study on Deformation and Shape Memory Effect of Hot Stamping Ni-Ti Shape Memory Alloy Sheet, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Taichung, Taiwan, 2018, MOST 106-2221-E-005-044 (in Chinese).
6
K.-J. Fann, Y.- J. Chen, W.-K. Lu, C.-Y. Wong, H.-Y. Hsieh, J.-C. Kuo, Study on Punching U-Shaped Profiles Made by Roll Forming of Metal Stripes, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Taichung, Taiwan, 2018, MOST 106-2622-E-005-016-CC3 (in Chinese).
7
K.-J. Fann, S.-C. Tsou, H. Eratz, Study on Design of a Two-Pass Roll Forging Process for a Round Bar to Square, Taiwan Symposium on Technology of Plasticity, Yunlin, Taiwan, 2018 (in Chinese).
8
K.-J. Fann, W.-K. Lu, Y.- J. Chen, Study on Cutting Process of U-Shaped Profiles with Impact Scissor, Taiwan Symposium on Technology of Plasticity, Yunlin, Taiwan, 2018, MOST 106-2622-E-005-016-CC3 (in Chinese).
9
K.-J. Fann, H.-Y. Hsu, Study on Following the Temperature Profile Determined for Dieless Drawing a Stainless Rod to Form an End Geometry, Proceedings of the 11th Asian Workshop on Micro/Nano Forming Technology (AWFMT 2018), Yunlin, Taiwan, 2018.
10
K.-J. Fann, S.-C. Tsou, H. Eratz, Procedure to Design Roll Forging Process of Round Bar to Square. Proceedings of the 21st International Conference on Advances in Materials- and Processing Technologies (AMPT 2018), Dublin, Ireland, 2018.
11
K.-J. Fann, J.-Y. Su, Stretch Forming of Solid-Solutionized Ni-Ti Shape Memory Alloy Sheet, Annual Meeting of Taiwan Forging Association, Taichung, Taiwan, 2017, MOST 104-2221-E-005-022 (in Chinese).
12
K.-J. Fann, C.-H. Chang, J.-Y. Su, H.-Y. Hsu, C.-Y. Lin, C.-H. Lin, C.-M. Chang, C.-C. Chen, Study on Deformation and Shape Memory Effect of Deep Drawing Ni-Ti Shape Memory Alloy Sheet, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Taichung, Taiwan, 2017, MOST 105-2221-E-005-029 (in Chinese).
13
K.-J. Fann, Y.-J. Chen, W.-K. Lu, C.-Y. Lin, T.-L. Chang, H.-Y. Chen, Study on Flaring of Roll Forming Metal Stripes into U-Shape Profile, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Taichung, Taiwan, 2017, MOST 105-2622-E-005-CC3 (in Chinese).
14
K.-J. Fann, C.-Y. Lin, Y.-J. Chen, Finite Element Analysis of Rolling Process to Locally Thin Metal Strips, Proceedings of the First Asia Pacific Symposium on Technology of Plasticity (APSTP 2017), Taichung, Taiwan. MOST 104-2622-E-005-016-CC3.
15
K.-J. Fann, C.-F. Yu, C.-H. Chang, Analysis of Dieless Drawing to Form the End of Metal Wires under Proportional Shape Evolution with Slab Method, Proceedings of he First Asia Pacific Symposium on Technology of Plasticity (APSTP 2017), Taichung, Taiwan.
16
K.-J. Fann, Z.-H. Lin, B.-H. Peng, Study on Single Point Incremental Forming an AA1060 Sheet, Proceedings of the First Asia Pacific Symposium on Technology of Plasticity (APSTP 2017), Taichung, Taiwan.
17
K.-J. Fann, J.-Y. Su, C.-H. Chang, Formability of Annealed Ni-Ti Shape Memory Alloy Sheet, Proceedings of the 5th International Conference on Mechanical Engineering, Materials Science and Civil Engineering (ICMEMSCE 2017), Kuala Lumpur, Malaysia, MOST 105-2221-E-005-029.
18
K.-J. Fann, J.-Y. Su, Cold Forming of Ni-Ti Shape Memory Alloy Sheet, Proceedings of the International Conference on Materials, Mechanical, and Manufacturing Engineering (ICMMME 2017), Beijing, China. MOST 104-2221-E-005-022.
19
K.-J. Fann, C.-H. Chang, J.-Y. Su, H.-Y. Hsu, C.-Y. Lin, C.-H. Lin, C.-M. Chang, C.-C. Chen, Study on Deformation and Shape Memory Effect of Ni-Ti Shape Memory Alloy Sheets under Plane Stress State, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Hsinchu, Taiwan, 2016, MOST 104-2221-E-005-022 (in Chinese).
20
K.-J. Fann, C.-Y. Lin, T.-L. Chang, R.-Y. Luo, W.-K. Lu, H.-Y. Hsieh, C.-M. Chang, H.-Y. Hsu, Study on Roll Forming Metal Stripes into U-Shape with Various Thickness, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Hsinchu, Taiwan, 2016, MOST 104-2622-E-005-016-CC3 (in Chinese).
21
K.-J. Fann, C.-C. Chen, Study on Grain Coarsening of Aluminum Alloy 6061 by Using Hot Ring Compression Test, Annual Meeting of Taiwan Forging Association, Taichung, Taiwan, 2016 (in Chinese)
22
K.-J. Fann, J.-Y. Su, C.-H. Chang, Study on Shape Memory Effect of Stretch Formed Ni-Ti Shape Memory Alloy Sheets, Taiwan Symposium on Technology of Plasticity, Kaohsiung, Taiwan, 2016, MOST 104-2221-E-005-022 (in Chinese).
23
K.-J. Fann, W.-A. Lai, Countersunk Studs Hot Forged in Core-Shell Type Metal Composite, Proceedings of 2016 International Conference on Advanced Manufacturing (ICAM 2016), Sun Moon Lake, Taiwan, 2016, MOST 102-2221-E-005-022.
24
K.-J. Fann, C.-C. Chen, Study on Grain Coarsening in Aluminum Alloy 6061 by Using Ring Compression Test, Proceedings of 2016 International Conference on Advanced Manufacturing (ICAM 2016), Sun Moon Lake, Taiwan, 2016.
25
K.-J. Fann, C.-C. Chen, On Grain Coarsening of Aluminum Alloy 6061 by Applying Ring Compression Test, Taiwan Symposium on Technology of Plasticity, Kaohsiung, Taiwan, 2016 (in Chinese).
26
K.-J. Fann, C.-H. Lin, B.-H. Peng, Study on Single Point Incremental Forming of Sheet Metals in Assistance of Ultrasonic Vibration, Taiwan Symposium on Technology of Plasticity, Kaohsiung, Taiwan, 2016 (in Chinese).
27
K.-J. Fann, C.-H. Lin, B.-H. Peng, Study on Single Point Incremental Forming of Sheet Metals, Conference of Automation Technology, Taichung, Taiwan, 2016 (in Chinese).
28
K.-J. Fann, W.-J. Lin, H.-Y. Hsu, C.-M. Chang, W.-K. Lu, Development of Warning Module for Deterioration of Lubricant in Forming Presses, Conference of Automation Technology, Taichung, Taiwan, 2016, III 105-C-1086 (in Chinese).
29
K.-J. Fann, J.-T. Hsieh, H.-Y. Hsu, Using SimuFact in Developing Roll Geometry for Roll Forging a Preform of Slender Forging Parts, Seminar of Forging and Die Technology, Taichung, Taiwan, 2016 (in Chinese).
30
K.-J. Fann, J.-Y. Su, Stretch Formed Ni-Ti Shape Memory Alloy Sheet Part, Proceedings of the 25th Anniversary International Conference on Metallurgy and Materials (METAL 2016), Brno, Czech Republic, 2016, MOST 104-2221-E-005-022.
31
W.-K. Lu, K.-J. Fann, C.-K. Wang, Dieless Drawing to Form Metal Wire End with a Fixed Load, Proceedings of the 5th International Conference on Virtual Machining Process Technology, Taipei, Taiwan, 2016.
32
K.-J. Fann, J.-Y. Su, Ni-Ti Shape Memory Alloy Sheet Part Stretch Formed at Room Temperature, Proceedings of the 2nd Edition Smart Materials & Surfaces Conference, Incheon , Korea, 2016, MOST 104-2221-E-005-022.
33
K.-J. Fann, C.-K. Wang, Study on Dieless Drawing Process to Form the End of Metal Wires under Constant Forces, Annual Meeting of Taiwan Forging Association, Taichung, Taiwan, 2015 (in Chinese).
34
K.-J. Fann, T.-L. Chang, B.-H. Peng, Drawing to Form the End of Metal Rods by Fixed Velocity of Heating Coil, The 34th National Conference of Chinese Society of Mechanical Engineering, Taichung, Taiwan, 2015 (in Chinese).
35
K.-J. Fann, C.-Y. Lin, C.-C. Chen, C.-H. Lin, W.-A. Lai, C.-F. Yu, Study on Roll Forming Metal Stripes into U-Shape with Geometry Features, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Kaohsiung, Taiwan, 2015, MOST 103-2622-E-005-016-CC3 (in Chinese).
36
K.-J. Fann, C.-F. Yu, H.-Y. Hsu, Analysis of Dieless Drawing a Metal Wire to Proportionally Form its End, The 32nd National Conference of Chinese Society of Mechanical Engineering, Kaohsiung, Taiwan, 2015 (in Chinese).
37
K.-J. Fann, P.-M. Huang, Cold Bending a Ni-Ti Shape Memory Alloy Wire, Proceedings of the 1st International Conference on Precision Machinery and Manufacturing Technology 2015 (ICPMMT 2015), Kenting, Taiwan, 2015, NSC 99-2221-E-005-017.
38
K.-J. Fann, P.-M. Huang, Shape Memory Effect in Aging of Ni-Ti Shape Memory Alloy Wire Bent in V-Shape at Room Temperature, Proceedings of the International Conference on Shape Memory and Superelastic Technologies (SMST 2015), Oxfordshire, United Kingdom, 2015, NSC 99-2221-E-005-017.
39
K.-J. Fann, H. Eratz, Computer Aided Design of Cross Wedge Rolling a Preform for Forging of Slender Parts, Annual Meeting of Taiwan Forging Association, Taichung, Taiwan, 2014 (in Chinese).
40
K.-J. Fann, C.-C. Chen, L.-H. Peng, P.-M. Huang, C.-F. Yu, T.-L. Chang, Investigation of Motion of the Gripper on Roll Forging a Preform for Forging of Slender Parts, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Taichung, Taiwan, 2014, MOST 102-2622-E-005-008-CC3 (in Chinese).
41
K.-J. Fann, W.-A. Lai, C.-K. Wang, R.-Y. Luo, J.-Y. Su, C.-H. Lin, Study on Forging Encapsulated Metal Composites, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Taichung, Taiwan, 2014, MOST 102-2221-E-005-022 (in Chinese).
42
K.-J. Fann, W.-A. Lai, Finite Element Analysis of Forging Encapsulated Metal Composites into Counter Sunk Studs, Annual Meeting of Taiwan Forging Association, Taichung, Taiwan, 2014, MOST 102-2221-E-005-022 (in Chinese).
43
K.-J. Fann, C.-W. Chang, Y.-M. Huang, Forming a Micro Blind Hole in Assistance of Ultrasonic Vibration, Proceedings of the 7th Asian Workshop on Micro/Nano Forming Technology (AWMFT 2014), Taipei, Taiwan, 2014.
44
K.-J. Fann, C.-C. Chen, R.-Y. Luo, Influence of Gripper Motion on Roll Forging a Preform for Forging of Slender Parts, Taiwan Symposium on Technology of Plasticity, Yunlin, Taiwan, 2014, MOST 102-2622-E-005-008-CC3 (in Chinese).
45
K.-J. Fann, C.-K. Wang, T.-L. Chang, Study on Forming the End of Metal Wires by Using Dieless Drawing Process under Constant Forces, Taiwan Symposium on Technology of Plasticity, Yunlin, Taiwan, 2014 (in Chinese).
46
K.-J. Fann, C.-K. Wang, T.-L. Chang, Influence of Drawing Forces on the End Form of Dieless Drawn Metal Wires, The 31st National Conference of Chinese Society of Mechanical Engineering, Taichung, Taiwan, 2014 (in Chinese).
47
K.-J. Fann, C.-K. Wang, C.-F. Yu, Study on Temperature Distribution during Forming he End of Metal Wires by Using Dieless Drawing Process, National Conference on Precision Manufacturing of Society of Manufacturing Engineers, Kaohsiung, Taiwan, 2014 (in Chinese).
48
K.-J. Fann, P.-M. Huang, J.-Y. Su, Study on Shape Memory Treatment and Cold Bending of Ni-Ti Shape Memory Alloy Wire, National Conference on Precision Manufacturing of Society of Manufacturing Engineers, Kaohsiung, Taiwan, 2014, NSC 99-2221-E-005-017 (in Chinese).
49
K.-J. Fann, H.-C. Hsu, Hot Forming a V-Shaped Ni-Ti Shape Memory Alloy Wire, Proceedings of the12th Asia-Pacific Conference on Engineering Plasticity and Its Applications (AEPA 2014), Kaohsiung, Taiwan, 2014, NSC 98-2221-E-005-008.
50
K.-J. Fann, J.-T. Hsieh, H. Eratz, Circular Metal Rods Roll Forged into a Lens Shaped Cross-Section with One Stage Roll Created by VeraCAD, Proceedings of the 5th International Conference on Advanced Manufacturing (ICAM 2014), Chiayi, Taiwan, 2014.
51
K.-J. Fann, L.-H. Peng, Using Hot Extrusion to Make Core-Shell Type Metal Composite Bulks, Proceedings of the 23rd International Conference on Metallurgy and Materials (METAL 2014), Brno, Czech Republic, 2014, NSC 101-2221-E-005-010.
52
K.-J. Fann, J.-T. Hsieh, C.-C. Chen, Circular Metal Rods Roll Forged into One Stage of Lens Shaped Cross-Section by Applying VeraCAD, National Conference on Precision Manufacturing of Society of Manufacturing Engineers, Taipei, Taiwan, 2013 (in Chinese).
53
K.-J. Fann, C.-W. Wang, Dieless Drawing Process to Form Metal Nail Tips, Proceedings of the 16th International Conference on Advances in Materials and Processing Technologies (AMPT 2013), Taipei, Taiwan, 2013.
54
K.-J. Fann, H.-C. Hsu, Thermomechanical Forming of NiTi Shape Memory Alloy Wire, Proceedings of the 16th International Conference on Advances in Materials and Processing Technologies (AMPT 2013), Taipei, Taiwan, 2013, NSC 98-2221-E-005-008.
55
K.-J. Fann, J.-T. Lai, J.-T. Hsieh, H.-C. Hsu, L.-H. Peng, C.-K. Wang, P.-M. Huang, C.-C. Chen, W.-A. Lai, C.-F. Yu, C.-H. Lin, Y.-H. Wang, Forming Encapsulated Metal Composites, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Taichung, Taiwan, 2013, NSC 101-2221-E-005-010 (in Chinese).
56
K.-J. Fann, H.-C. Hsu, P.-M. Huang, Shape Memory Effect of a V-Shaped Thermomechanically Bended Ni-Ti Shape Memory Alloy Wire, Annual Meeting of Taiwan Forging Association, Taichung, Taiwan, 2013, NSC 98-2221-E-005-008 (in Chinese).
57
K.-J. Fann, H.-C. Hsu, P.-M. Huang, Finite Element Analysis of Thermomechanical Bending a V-Shaped Ni-Ti Shape Memory Alloy Wire, Taiwan Symposium on Technology of Plasticity, Yunlin, Taiwan, 2013, NSC 99-2221-E-005-017 (in Chinese).
58
K.-J. Fann, J.-W, Wang, C.-K. Wang, Finite Element Analysis of Dieless Drawing a Metal Wire with Nail Tip, The 29th National Conference of Chinese Society of Mechanical Engineering, Kaohsiung, Taiwan, 2012 (in Chinese).
59
K.-J. Fann, J.-T. Hsieh, Computer Aided Design and Analysis of Roll Forging a Preform for Slender Forging Parts, National Conference on Precision Manufacturing of Society of Manufacturing Engineers, Taichung, Taiwan, 2012, NSC 99-2622-E-005-018-CC3 (in Chinese).
60
K.-J. Fann, J.-H. Chen, P.-M. Huang, Applying C-Type External Retaining Rings to Test the Environment Causing Hydrogen Embrittlement of Steel Parts during Acid Pickling, s, National Conference on Precision Manufacturing of Society of Manufacturing Engineers, Taichung, Taiwan, 2012 (in Chinese).
61
K.-J. Fann, C.-W. Wang, Study on Dieless Drawing Metal Wires with a Nail Tip, National Conference on Precision Manufacturing of Society of Manufacturing Engineers, Taichung, Taiwan, 2012 (in Chinese).
62
K.-J. Fann, H.-C. Hsu, Thermomechanicl Forming Ni-Ti Shape Memory Alloys, National Conference on Precision Manufacturing of Society of Manufacturing Engineers, Taichung, Taiwan, 2012, NSC 98-2221-E-005-008 (in Chinese).
63
K.-J. Fann, H.-S. Liu, L.-H. Peng, Finite Element Analysis of Pneumatic Die Cushions under Impact Loading, The 36th National Conference on Mechanics, Taoyuang, Taiwan, 2012 (in Chinese).
64
M.-H. Chen, K.-J. Fann, W.-T. Hsieh, Study on Draw Bending of Metal Tube Applied with Axial Thrust into a Small Bend Radius, Proceedings of the 4th International Conference on Advanced Manufacturing (ICAM 2012), Yilan, Taiwan, 2012, NSC 91-2212-E-005-019.
65
K.-J. Fann, J.-T. Hsieh, Optimization of Roll Forging a Preform for Forging Curved and Slender Parts, Presentation Assembly of Project Results Granted by the Ministry of Science and Technology of the Public of China, Kaohsiung, Taiwan, 2012, NSC 100-2622-E-005-012-CC32 (in Chinese).
66
K.-J. Fann, J.-T. Hsieh, Computer Aided Design and Analysis of Roll Forging a Preform for Curved Slender Forging Parts, Annual Meeting of Taiwan Forging Association, Taichung, Taiwan, 2012, NSC 100-2622-E-005-012-CC3 (in Chinese).
67
K.-J. Fann, L.-H. Peng, Finite Element Analysis of Forming Encapsulated Metal Composite Bulks, Annual Meeting of Taiwan Forging Association, Taichung, Taiwan, 2012, NSC 101-2221-E-005-010 (in Chinese).
