Member
| Name | 黃朱瑜/Chu-Yu Huang |
|---|---|
| Title | 副教授 |
| Education | 美國華盛頓大學 機械工程 博士 |
| Office Phone | 04-22840433 ext.419 |
| Office | 機械系館4樓 P419 |
| tomhuangnchu.edu.tw | |
| Division | 固力設計組、系統控制組、精密製造組 |
| Laboratory | 應科大樓4樓 AT446 |
| Laboratory Phone | 04-22840165 ext.4462 |
| Website | 感測器實驗室 |
| Research Expertise | 光機電感測裝置、奈微米感測裝置、超音波影像、光聲影像 |
- University of Washington, Seattle, Mechanical Engineering Ph.D. (2004.03~2009.12)
- National Chung Hsing University Mechanical Engineering M.S. (1997.09~1999.06)
- National Chung Hsing University Mechanical Engineering B.S.(1993.09~1997.06)
現職(Current):
Associate Professor, Department of Mechanical Engineering, National Chung Hsing University, Taiwan (2022/08~current )
2016~2022:
Assistant Professor, Department of Mechanical Engineering, National Chung Hsing University, Taiwan (2016/08~2022/07 )
2013 - 2016:
Researcher, Industrial Technology Research Institute, Biomedical Technology and Device Research Laboratories, Taiwan
2010 - 2013:
Researcher, Industrial Technology Research Institute, Electronics and Optoelectronics Research Laboratories, Taiwan
2007 - 2009:
Teaching associate of Introduction to Visualization and Computer-Aided Design class, University of Washington, U.S.A.
2007 summer:
Lecturer of Introduction to Visualization and Computer-Aided Design class, University of Washington, U.S.A.
2005 - 2006:
Research assistant of shear sensor development project, University of Washington, U.S.A.
2001 - 2003:
CIM Engineer, Vanguard International Semiconductor Corporation, Taiwan
Associate Professor, Department of Mechanical Engineering, National Chung Hsing University, Taiwan (2022/08~current )
2016~2022:
Assistant Professor, Department of Mechanical Engineering, National Chung Hsing University, Taiwan (2016/08~2022/07 )
2013 - 2016:
Researcher, Industrial Technology Research Institute, Biomedical Technology and Device Research Laboratories, Taiwan
2010 - 2013:
Researcher, Industrial Technology Research Institute, Electronics and Optoelectronics Research Laboratories, Taiwan
2007 - 2009:
Teaching associate of Introduction to Visualization and Computer-Aided Design class, University of Washington, U.S.A.
2007 summer:
Lecturer of Introduction to Visualization and Computer-Aided Design class, University of Washington, U.S.A.
2005 - 2006:
Research assistant of shear sensor development project, University of Washington, U.S.A.
2001 - 2003:
CIM Engineer, Vanguard International Semiconductor Corporation, Taiwan
| 學期 | 科目名稱 | 學分 | 開設班級 |
|---|---|---|---|
| 第111學年度 第1學期 | 靜力學 | 3 | A |
| 第110學年度 第2學期 | 感測器原理、設計與應用 | 3 | 碩士班 |
| 第110學年度 第2學期 | 工程圖學 Engineering Drawing | 2 | B |
| 第110學年度 第1學期 | 電腦輔助機械製圖 | 2 | B |
| 第110學年度 第1學期 | 機械工程實驗(一) | 1 | A |
| 第109學年度 第2學期 | 感測器原理、設計與應用 | 3 | 碩士班 |
| 第109學年度 第2學期 | 工程圖學 Engineering Drawing | 2 | B |
| 第108學年度 第1學期 | 電腦輔助機械製圖 | 2 | B |
| 第108學年度 第1學期 | 工場實習(一) Machine Shop Practice(I) | 1 | A |
| 第108學年度 第1學期 | 機械設計與製作專題 Special Topics in Mechanical Engineering Design | 2 | AB |
| 第107學年度 第2學期 | 工程圖學 Engineering Drawing | 2 | B |
| 第107學年度 第2學期 | 工場實習(二) Machine Shop Practice (II) | 1 | B |
| 第107學年度 第2學期 | 機械設計與製作專題 Special Topics in Mechanical Engineering Design | 2 | AB |
| 第107學年度 第2學期 | 專題討論(一) Seminar (I) | 0 | G |
| 第106學年度 第2學期 | 進階程式設計 Advanced Programming | 3 | AB |
期刊論文
| # | 標題 |
|---|---|
| 1 | Hsiao-Ning Weng, Chu-Yu Huang, A common-path digital holographic microscope with a rotatable birefringent prism for synthesizing high-quality quantitative phase images from multi-angle interferograms, Results in Physics, Volume 31. (2021) (SCI) (IF: 4.476) |
| 2 | Huang, C.-Y.; Hsiao, H.-C. Integrated EC-SERS Chip with Uniform Nanostructured EC-SERS Active Working Electrode for Rapid Detection of Uric Acid. Sensors, 2020, 20, 7066. (2020) (SCI) (IF: 3.576) |
| 3 | Huang, C.-Y.; Chien, C.-H. "Facile Fabrication of Micro/Nano Hierarchical SERS Sensor via Anisotropic Etching and Electrochemical Treatment for Malachite Green Detection," Applied Sciences, 2019, 9(23), 5237. (2019) (SCI) (IF: 2.679) |
| 4 | Chu-Yu Huang and Ming-Shiuan Tsai "Tunable Silver Nanoparticle Arrays by Hot Embossing and Sputter Deposition for Surface-Enhanced Raman Scattering," Applied Sciences, vol. 9, no. 8, p. 1636, Apr. (2019) (SCI) (IF: 2.679). |
| 5 | Chu-Yu Huang and Ming-Shiuan Tsai "Fabrication of 3D nano-hemispherical cavity array plasmonic substrate for SERS applications," International Journal of Optomechatronics, 12:1, 40-52 (2018) (SCI) (IF: 1.9). |
| 6 | Chu-Yu Huang, Wen-Hun Cheng, and Chir-Weei Chang, " Ultrafast high quality ultrasound imaging using k-space beamforming and angular compounding with coherence factor," Ultrasonics, ULTRAS-D-15-00274, in Revision, (2015)(SCI) |
| 7 | Chu-Yu Huang and Wei-Chih Wang, "Birefringent prism based Fourier transform spectrometer," Optics Letters, Vol. 37, Issue 9, pp. 1559-1561, (2012) (SCI) (IF: 3.714). |
| 8 | Chu-Yu Huang, Wei-Chih Wang, “Compact Liquid Crystal Based Fourier Transform Spectrometer System,” International Journal of Optomechatronics, Vol. 4, Iss. 2, (2010) (SCI) (IF: 1.9). |
| 9 | Wei-Chih Wang, Chu-Yu Huang “Development of a Microfabricated Optical Bend Loss Sensor for Distributive Pressure Measurement,” IEEE Transactions on Biomedical Engineering, Volume:55, Issue 2, Part:1, 2008, 614-625 (SCI) (IF: 4.538). |
| 10 | Chu-Yu Huang (Univ. of Washington, Seattle, USA); Wei-Chih Wang; Wen-Jong Wu; Ledoux, W.R. “Composite optical bend loss sensor for pressure and shear measurement,” Source: IEEE Sensors Journal, v 7, n 11, Nov. 2007, p 1554-65 (SCI) (IF: 3.301). |
| 11 | Wang, G. J., Chen, J. L., and Huang, C. Y., “A New Optimization Strategy For Chemical Mechanical Polishing Process,” JSME International Journal, Series C, Vol.44, No. 2., (2001). (NSC88-2212-E-005-016)(SCI) |
研討會論文
| # | 標題 |
|---|---|
| 1 | Chu-Yu Huang, Ming-Shiuan Tsai, "Development of batch producible hot embossing 3D nanostructured surface-enhanced Raman scattering chip technology," Proc. SPIE 10356, Nanostructured Thin Films X, 103560R (Sep. 2017) |
| 2 | Chu-Yu Huang, Wen-Hun Cheng, and Chir-Weei Chang. (2015). "Ultrafast high quality ultrasound imaging using k-space beamforming and angular compounding with coherence factor." 182-183. 10.1109/ICCE-TW.2015.7216844. |
| 3 | Chu-Yu Huang, Wen-Hun Cheng, and Chir-Weei Chang, "Extended Shear Wavefront Generation Using Cubic Phase Wavefront Modulating Method ," The International Tissue Elasticity Conference, Sep. 2015 |
| 4 | Chu-Yu Huang and Chir-Weei Chang " Extended Depth of Focus Ultrasound Imaging Technology," International Conference on Biomedical Ultrasound (ICBMU), 22-23 OCT. 2013 |
| 5 | Chu-Yu Huang; Wei-Chih Wang, "A fourier transform spectrometer based on birefringent interferometer," Optomechatronic Technologies (ISOT), 2012 International Symposium on Optomechatronic Technologies, vol., no., pp.1,4, 29-31, Oct. 2012 |
| 6 | C. Y. Huang, B. Estroff, W.C. Wang, “Compact Fourier transform spectrometer without moving parts,” Health Monitoring of Structural and Biological Systems 2012. Proceedings of the SPIE, Volume 8348, pp. 83480W-83480W-11 (2012) |
| 7 | Kuo-Chi Chiu, Sheng-Li Chang, Chu-Yu Huang and Hann-Wen Guan, "Design and fabrication of substrates with microstructures for bio-applications through the modified optical disc process", Proc. SPIE 8068, 80680F (2011); |
| 8 | Sheng-Li Chang, Kuo-Chi Chiu, Chu-Yu Huang, and Hann-Wen Guan, " A novel high efficiency approach for immobilizing bio-molecules”, Annual Symposium on Biomedical Engineering and Technology, pp.141111192, Aug. 2011 |
| 9 | C. Y. Huang, SPRi (Surface Plasmon Resonance Imagine) Platform Development, EOL update, Volume 13, Jan. 2011 |
| 10 | Wei-Chih Wang; Chu-Yu Huang; Te-Kuang Chiang; Reinhall, P.G.,Univ. of Washington, “Optical and mechanical characterization of microfabricated optical bend loss sensor for distributive pressure measurement,” Proceedings of the SPIE - The International Society for Optical Engineering, v 6532, 6 April 2007, p 65321K-1-10 |
| 11 | Chu-Yu Huang, Wen-Jong Wu , Shih-Chieh Fu, Per G. Reinhall, Wei-Chih Wang, Univ. of Washington, “A wireless composite optical bend loss sensor for pressure and shear measurement,” Proceedings of SPIE -- Volume 6177 (Mar. 15, 2006) |
| 12 | Chu-Yu Huang, Chao-Shih Liu, Reynold Panergo, Cheng-Sheng Huang, and Wei-Chih Wang,” Developments of a force image algorithm for micromachined optical bend loss sensor,” Proceedings of SPIE, Volume 5768, May 2005, pp. 36-43 |
| 13 | Wang, G. J., Chen, J. L., and Hwang, J. Y., 2000, “A New Optimization Strategy For Chemical Mechanical Polishing Process,” Proceeding of the 2000 ASME International Mechanical Engineering Congress, Orlando, Florida. |
| 14 | Wang, G. J. and Huang, J. Y., 1999, “A New Optimization Approach for CMP Process, “Proceeding of the 6th Symposium on Nano Device Technology, Taiwan, pp. 119-119. |
| 計畫名稱 | 擔任工作 | 起訖年月 | 補助機構 |
|---|---|---|---|
| 新型高光譜成像系統之開發及其智慧化細菌快速篩檢應用 | 計畫主持人 | 110-08-01 ~ 111-10-31 | 科技部 |
| 開發新型數位全像顯微系統及其智慧化細胞檢測應用 | 計畫主持人 | 108-08-01 ~ 110-07-31 | 科技部 |
| 整合奈米電子、聲波電子、電化學技術之複合感測器研發及其在生物檢測之應用 | 共同主持人 | 107-08-01 ~ 109-07-01 | 科技部 |
| 航太蜂巢複合材料之智慧機器手臂超音波加工系統(3/3) | 共同主持人 | 108-08-01 ~ 109-07-01 | 科技部 |
| 開發可熱壓成型大量製造之三維奈米表面增強拉曼晶片技術及其塑化劑檢測應用(2/2) | 計畫主持人 | 107-08-01 ~ 108-07-01 | 科技部 |
| 開發可熱壓成型大量製造之三維奈米表面增強拉曼晶片技術及其塑化劑檢測應用(1/2) | 計畫主持人 | 106-08-01 ~ 107-07-01 | 科技部 |
| 航太蜂巢複合材料之智慧機器手臂超音波加工系統(1/3) | 共同主持人 | 106-08-01 ~ 107-07-01 | 科技部 |
| 開發可調式奈米表面增強拉曼結構技術 | 計畫主持人 | 105-08-01 ~ 106-07-01 | 科技部 |
| 超高速超音波成像技術及組織彈性影像量測技術 | 計畫主持人 | 103-03-01 ~ 104-03-01 | 行政院經濟部 |
| 應用於超音波系統之高速長焦深成像技術開發 | 計畫主持人 | 101-03-01 ~ 102-03-01 | 行政院經濟部 |
| 表面電漿共振影像技術平台開發 | 子計畫主持人 | 99-03-01 ~ 100-03-01 | 行政院經濟部 |
| 微小化高速傅立葉光譜系統 | 研究人員 | 96-04-01 ~ 98-10-01 | UW |
| Electro-optic scanner 超高速掃描裝置 | 研究人員 | 95-04-01 ~ 96-04-01 | NIH |
| 微製造的力量分佈感測器 | 研究人員 | 94-04-01 ~ 95-04-01 | VA hospital |