Member

Name 陳志敏/Jerry M. Chen
Title 兼任教授與榮譽退休教授
Education University of Arizona 機械工程系所 博士
Office Phone 04-22840433 ext.411
Office 機械系館4樓 P411
Email jerrycdragon.nchu.edu.tw
Division 兼任教師
Research Expertise 微流體元件系統、系統動力學、動態系統
University of Arizona 機械工程系所 博士(1998-09-01~1998-09-01)
  • 國立中興大學 機械工程學系 教授
  • 國立中興大學 機械工程學系 副教授

期刊論文

#標題
1Jerry Min Chen*, Yu-Jen Chen and Lung-Sheng Tseng (2013). Micromixing of Fluids within Droplets Generated on Centrifugal Microfluidics. JSME Journal of Fluid Science and Technology, Vol. 8, No. 2, pp. 200-207.
2Huan-Chao Chiu, Jeng-Wen Lai, and Jerry M. Chen* (2012). Mixing Enhancement in Microchannels by Periodic Pressure Disturbances. Journal of Aeronautics, Astronautics and Aviation, Series A, Vol. 44, No. 2, pp. 095 - 102. (EI).
3Huan Chao Chiu, and Jerry M. Chen* (2012). Numerical Study of Fluid Mixing in a Microchannel with a Circular Chamber on a Rotating Disk. Advanced Materials Research, Vols. 542-543, pp. 1113-1119. (EI).
4J. M. Chen, M.-C. Kuo, and Chien-Po Liu, 2011, “Control of Droplet Generation in Flow-Focusing Microfluidic Device with a Converging-Diverging Nozzle Shaped Section,” Japanese Journal of Applied Physics, Vol. 50, No. 10, pp. 107301-(1-7) (SCI).
5Huan Chao Chiu, and Jerry M. Chen* (2011). Enhancement of Fluid Mixing in a Double T-shaped Micromixer by Periodic Disturbances of Pressure. Advanced Materials Research, Vol. 339, pp. 118-123. (EI).
6J. M. Chen, P.-C. Hunag, and M.-G. Lin, 2008, “Analysis and Experiments of Capillary Valves for Microfluidics on a Rotating Disk,” Microfluidics and Nanofluidics, Vol. 4, pp. 427-437 (SCI)
7J. M. Chen, C.-Y. Chen, and C.-H. Liu, 2008, “Pressure Barrier in an Axisymmetric Capillary Microchannel with a Sudden Expansion,” Japanese Journal of Applied Physics, Vol. 47, No. 3, pp. 1683-1689. (SCI)

研討會論文

#標題
1a. 國外會議論文:
2J. M. Chen, C. W. Hsu, S.-C. Huang, “Visualization of Fluid Mixing in U-shaped Microchannels on a Rotating Disk,” Proceedings of the 19th International Symposium on Transport Phenomena, 17-20 August, 2008, Reykjavik, Iceland.
3J. M. Chen, M.-C. Kuo, “Generation and Control of Ddroplet in Cross Microchannel Flow with a Converging-Diverging Nozzle Shaped Section,” Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 12-14, 2010, Paper ESDA2010-24012.
4J. M. Chen, and C.-P. Liu “Simulations of Droplet Emulsion in Microfluidics of Flow-focusing and T-junction Geometries,” Proceedings of the 22nd International Symposium on Transport Phenomena, Delft, The Netherlands, Novemer 8-11, 2011.
5J. M. Chen, Y.-J. Chen, and L.-S. Tseng, “Micromixing of Fluids within Droplets Generated on Centrifugal Microfluidics,” The Ninth International Conference on Flow Dynamics (ICFD2012), Sendai, Japan, September 19-21, 2012, Paper GS1-13.
6b. 國內會議論文:
7H.-C. Chiu, J.-Y. Chen, J. M. Chen, “Visualization of Fluid Mixing in a Microchamber on a Rotating Disk,” Proceedings of MNHT2008 Micro/Nanoscale Heat Transfer International Conference, January 6-9, 2008, Tainan, Taiwan. 計畫編號：NSC-95-2212-E-005-090
8J. M. Chen, W.-J. Tsai, K.-J. Yen, “Biased Split of Fluid Filling in Microfluidics on a Rotating Disk,” Proceedings of 2008 AASRC Conference, Dansui, Taiwan, December 6, 2008. 計畫編號：NSC 96-2221-E-005-072.
9陳炯翰，劉忠敏，陳志敏, “旋轉微流道內兩相流之動態數值模擬,” Proceedings of 2008 AASRC Conference, Dansui, Taiwan, December 6, 2008. 計畫編號：NSC 96-2221-E-005-072.
10林祐駿，郭名哲，陳志敏, “T型微流道乳化液滴生成與控制之研究,” Proceedings of 25th CSME National Conference, Changhua, Taiwan, October 21-22, 2008. 計畫編號：NSC 96-2221-E-005-072.
11劉忠敏，劉建伯，陳志敏, “T 型流道中微流體乳化現象數值模擬與分析,” Proceedings of 2009 Computational Fluid Dynamics Conference in Taiwan第16屆全國計算流體力學學術研討會, Yilan,Taiwan, July 31-August 1, 2009. 計畫編號：NSC-97-2221-E-005-040.
12郭名哲，黃夙黛，陳志敏, “十字噴嘴型微流道生成乳化液滴可視化實驗,” Proceedings of 26th CSME National Conference, Tainan, Taiwan, October 20-21, 2009.
13陳志敏，梁博欣, “血液於旋轉微流道晶片沉降分離與型態之可視化實驗,” Proceedings of 2009 AASRC/CSCA Joint Conference, Taipei, Taiwan, December 12, 2009.
14黃韋翔，簡百駿，陳志敏, “應用梳狀微流道分離微顆粒之設計與可視化實驗,” Proceedings of 2009 AASRC/CSCA Joint Conference, Taipei, Taiwan, December 12, 2009.邱煥釗，陳志敏, “週期性干擾T型微流道流體混合之模擬分析,” Proceedings of 26th CSME National Conference, Tainan, Taiwan, October 20-21, 2009.
15劉建伯，陳志敏, “比較流體聚焦與T型微流道生成乳化液滴之數值模擬,” Proceedings of 2010 AASRC Conference, Taoyuan, Taiwan, December 4, 2010.陳煜壬，陳志敏,“利用流體聚焦生成微液滴之混合反應實驗,” Proceedings of 2010 AASRC Conference, Taoyuan, Taiwan, December 4, 2010.簡百駿，曾隆盛，陳志敏,“利用雙十字型微流道交替生成乳化液滴可視化實驗,” Proceedings of 27th CSME National Conference, Taipei, Taiwan, December 10-11, 2010, Paper AA03-018.
16陳煜壬，曾隆盛，陳志敏, “旋轉微流道生成液滴混合反應之實驗研究,” Proceedings of 2011 AASRC Conference, Taichung, Taiwan, November 5, 2011. 計畫編號：NSC-99-2221-E-005-028.
17曾隆盛，陳志敏,“利用微流道生成膠珠與封裝顆粒之實驗研究,” Proceedings of 28th CSME National Conference, Taichung, Taiwan, December 10-11, 2011, Paper E05-004.
18林聖家，蔡惟亘，陳志敏,“微流道生成液滴之阻抗量測,”Proceedings of 29th CSME National Conference, Koahsiung, Taiwan, December 7-8, 2012.
19高睿廷，羅永儒，陳志敏,“旋轉碟片上流體聚焦流道生成微氣泡之可視化實驗,” Poceedings of 2012 AASRC Conference, Hsinchu, Taiwan, December 15, 2012. Paper 02-14.
20*Wei-Hsiang Huang, Wei-Hsuan Tsai, Jerry M. Chen*, “Separation of Microparticles in Comb-like Microchannels with Different Inlet Arrangements, ” Proceedings of 12th Asian Symposium on Visualization, Tainan, Taiwan, May 19-23, 2013, Paper ASV12-124.
21Huan-Choa Chiu, Jerry M. Chen *, “Coriolis Induced Vortices in Centrifugal Microfluidics for Enhancing Mixing,” Proceedings of 20th National Computational Fluid Dynamics Conference, Nantou, Taiwan, August 21-23, 2013.
22蔡惟亘，洪國翰，陳志敏, “利用梳狀流道分離捕捉及操控單一顆粒之實驗研究,” Poceedings of 2013 AASRC Conference, Tamsui, New Taipei City, November 30, 2013. Paper 13-04.
23莊文嘉，洪國翰，鍾官榮，吳嘉哲，陳志敏, ”球閥之金屬密封元件設計分析與量測,” Proceedings of 30th CSME National Conference, Ilan, Taiwan, December 6-7, 2013.
計畫名稱擔任工作起訖年月補助機構
利用梳狀流道分離捕捉及操控單一顆粒之實驗研究(II) (102-2221-E-005-034-))主持人102-08-01 ~ 103-07-31國家科學委員會
滑動面機械加工紋理之摩擦特性探討(102-2221-E-005-023-)主持人102-08-01 ~ 103-07-31國家科學委員會
利用梳狀流道分離捕捉及操控單一顆粒之實驗研究(101-2221-E-005-018-)主持人102-08-01 ~ 103-07-31國家科學委員會
球閥之金屬密封元件設計分析與量測(101-2622-E-005-003-CC2) (產學合作計畫-開發型)主持人101-02-01 ~ 102-01-31國家科學委員會
旋轉碟片微流道生成微液滴混合反應之可視化實驗與分析(II) (99-2221-E-005-028-)主持人99-08-01 ~ 100-12-01國家科學委員會
龍頭花灑分水器引生水錘效應之探討與改善(99-2622-E-005-011-CC3) (產學合作計畫-應用型)主持人99-06-01 ~ 100-05-31國家科學委員會
旋轉碟片微流道生成微液滴混合反應之可視化實驗與分析(98-2221-E-005-057-)主持人98-08-01 ~ 99-07-31國家科學委員會
旋轉碟片之兩相微流場可視化實驗研究：血液沉降分離與混合標定(97-2221-E-005-040-)主持人96-08-01 ~ 97-07-31國家科學委員會
製作於旋轉碟片上之兩相微流場可視化實驗研究(96-2221-E-005-072-)主持人95-08-01 ~ 96-07-31國家科學委員會
吸氣式安全氣囊充氣器之模組設計及開發(94-2622-E-005-024-CC3) (產學合作計畫-應用型)主持人94-11-01 ~ 95-10-31國家科學委員會
旋轉微流道快速混合之可視化量測實驗(1/2)(94-2212-E-005-017-)主持人94-08-01 ~ 95-10-31國家科學委員會
球閥之金屬密封元件設計分析與量測(NSC 101-2622-E-005-003-CC2合作企業部分) (產學合作計畫-開發型)主持人101-02-01 ~ 102-01-31緯凡金屬股份有限公司
龍頭花灑分水器引生水錘效應之探討與改善(99-2622-E-005-011-CC3合作企業部分)(產學合作計畫-應用型)主持人99-06-01 ~ 100-05-31成霖企業股份有限公司
微流口實驗分析與壓縮室最佳模擬主持人95-07-01 ~ 95-12-15財團法人工業技術研究院