系所成員 Faculty and Staff

Name 王威翔/Wei-Hsiang Wang
Title 副教授
Education 國立交通大學 機械工程學系 博士
Office Phone 04-22840433 ext.312
Office 機械系館3樓 P312
Email whwangdragon.nchu.edu.tw
Division 能源熱流組
Laboratory 應科大樓4樓 AT427
Laboratory Phone 04-22840165 ext.4271
Website 計算流體暨高速運算實驗室
Research Expertise 計算流體力學
汽車空氣動力學
內燃機與燃燒模擬
高速平行運算
GPU平行運算
低速可壓縮流
氣動聲學
物理訊息神經網路
  • 國立交通大學 機械工程學系 博士(2009/08~2014/06)
  • 國立交通大學 機械工程學系 碩士(2006/08~2008/07)
  • 國立交通大學 機械工程學系 學士 (2002/09~2006/06)
  • 日本理化學研究所計算科學研究中心
    Complex Phenomena Unified Simulation Research Team
    博士後研究員
    2016/04 - 2019/05
  • 日本北海道大學
    Computational Fluid Mechanics Laboratory
    博士後研究員
    2015/06 - 2016/03
  • 國立交通大學
    Application of Thermal and Fluid Laboratory
    博士後研究員
    2014/07 - 2015/05
  • 美國德州農工大學
    Turbine Heat Transfer Laboratory
    訪問學者
    2013/07 - 2014/02
#標題
1112學年國立中興大學教學特優獎
2112學年國立中興大學工學院傑出教學教師獎
3112學年國立中興大學工學院優良勞作教育導師
學期科目名稱學分開設班級
108上機械工程實驗(三) a3A
108上流體力學 b3B
108上專題討論(一)2碩士班
108下熱傳學3B
108下專題討論(三)2碩士班

期刊論文

#標題
1A compact open boundary treatment for a pure thermal plume by direct numerical simulation, International Communications in Heat and Mass Transfer, 157, 107832, 2024.
2A numerical investigation of Particle Swarm Optimization to improve Film-cooling effectiveness from converging slot hole, International Journal of Aeronautical and Space Sciences, 2024.
3Pressure-sensitive paint measurements on the cavity with passive control devices under transonic flow, Journal of Mechanics, 39, 280-291, 2023.
4The numerical investigation of aerodynamics and aeroacoustics effects in a full-scale true wireless headphone, Journal of Mechanics, 39, 261-279, 2023.
5A sharp interface immersed boundary method for thin-walled geometries in viscous compressible flows, International Journal of Mechanical Sciences, 253, 108401, 2023.
6Prediction of Transonic and Subsonic Wind Tunnel Aerodynamic Data by Neural Networks, Journal of the Chinese Society of Mechanical Engineers, 43(5), 509-520, 2022.
7Direct numerical simulation of film cooling with a fan-shaped hole under low Reynolds number conditions. International Journal of Heat and Mass Transfer, 123, 544-560, 2018.
8Investigation of boundary layer thickness and turbulence intensity on film cooling with a fan-shaped hole by direct numerical simulation. International Communications in Heat and Mass Transfer, 96, 12-19, 2018.
9An investigation of the unstable phenomena of natural convection in parallel square plates by multi-GPU implementation. Numerical Heat Transfer, Part B: Fundamentals, 71, 66-83, 2017.
10Compressible direct numerical simulation with a hybrid boundary condition of transitional phenomena in natural convection. International Journal of Heat and Mass Transfer, 90, 654-664, 2015.
11An investigation of natural convection in a three dimensional square wavy channel. International Communications in Heat and Mass Transfer, 66, 122-132, 2015.
12Applying Compute Unified Device Architecture to Investigate Gaseous Discharge from High-Pressure Vessel. Journal of Thermophysics and Heat Transfer, 30, 130-143, 2015.
13An investigation of natural convection in parallel square plates with a heated top surface by a hybrid boundary condition. International Journal of Thermal Sciences, 84, 48-61, 2014.
14An investigation of effects of heights and a length on natural convection of three dimensional parallel plates with a heated bottom surface by a CUDA computation platform. International Journal of Heat and Mass Transfer, 67, 118-130, 2013.
15An investigation of natural convection in parallel square plates with a heated bottom surface by an absorbing boundary condition. International Journal of Heat and Mass Transfer, 56(2013), 35–44, 2013.
16An investigation of natural convection of three dimensional horizontal parallel plates from a steady to an unsteady situation by a CUDA computation platform. International Journal of Heat and Mass Transfer, 55(2012), 4638-4650, 2012.
17An investigation of natural convection in a three dimensional tapered chimney without Boussinesq assumption. International Communications in Heat and Mass Transfer, 39, 509- 513, 2012.
18An investigation of compressible forced convection in a three dimensional tapered chimney by CUDA computation platform. International Journal of Heat and Mass Transfer, 54(2011), 3420-3430, 2011.

研討會論文

#標題
1Numerical Simulation of Aerodynamics and Aeroacoustics in True Wireless Stereo Headphone Noise Isolating Designs. The 20th International Conference on Flow Dynamics, Sendai, Japan. (2023)
2The Numerical Approach of Rayleigh–Bénard Convection by Physics Informed Neural Network. The 20th International Conference on Flow Dynamics, Sendai, Japan. (2023)
3Simulations of Natural Convection with Heated Moving Sphere by CFD. The 20th International Conference on Flow Dynamics, Sendai, Japan. (2023)
4Numerical Simulation of Large-scale Turbulent Rayleigh–Bénard Convection by GPGPU. Advances in Computational Mechanics, Austin, TX, USA. (2023)
5The Hydrodynamic Characteristics of a Swimming Rhynchobatus Australiae by Immersed Boundary Method. The 19th International Conference on Flow Dynamics, Sendai, Japan. (2022)
6Simulation and Noise Analysis of Behind-the-ear(BTE) Hearing Aids by CFD. The 19th International Conference on Flow Dynamics, Sendai, Japan. (2022)
7An CFD Investigation of Natural Convection by Heating Plates with Multi-GPU Implementation. The 19th International Conference on Flow Dynamics, Sendai, Japan. (2022)
8A Scalable Framework for Numerical Simulation of Combustion in Internal Combustion Engines. Proceedings of the Platform for Advanced Scientific Computing Conference. (2020)
9Fully Compressible Combustion Simulation of RCM in Hierarchical Cartesian Mesh System by Immersed Boundary Method. The 4th Thermal and Fluids Engineering Conference, Las Vegas, NV, USA. (2019)
10The Numerical Work of IC Engine Simulation by Fully Compressible Flow Solver in Hierarchical Cartesian Mesh System. The 15th International Conference on Flow Dynamics, Sendai, Japan. (2018)
11CFD Simulation of RCM Combustion by Building Cube Method. The 12th Asian Computational Fluid Dynamics Conference, Yilan, Taiwan. (2018)
12The IC engine simulation using hierarchical Cartesian mesh framework. Proceedings of the 6th European Conference on Computational Mechanics, Glassgow, UK. (2018)
13Investigation of open boundary problem in pure thermal plume by hybrid boundary condition with multi-GPU implementation. The 3rd Thermal and Fluids Engineering Conference, Fort Lauderdale, FL, USA. (2018)
14An investigation of implicit turbulence modeling for laminar-turbulent transition in natural convection. 70th Annual Meeting of the APS Division of Fluid Dynamics, Denver, CO, USA. (2017)
15A deployment of HPC algorithm into pre/post- processing for industrial CFD on K-computer. The International Conference for High Performance Computing, Networking, Storage and Analysis, Denver, CO, USA. (2017)
16Fully compressible aerodynamics and aeroacoustics simulation of a full- scale road vehicle. The 14th International Conference on Flow Dynamics, Sendai, Japan. (2017)
17An immersed boundary method for compressible flows at low Mach numbers on engineering applications using massive parallelization systems. IACM 19th International Conference on Finite Elements in Flow Problems-FEF, Rome, Italy. (2017)
18Unstable phenomena of low speed compressible natural convection with open boundaries by multi-GPU implementation. 69th Annual Meeting of the APS Division of Fluid Dynamics, Portland, Oregon, USA. (2016)
19Unstable Phenomena of Low Speed Compressible Natural Convection Flow. The 13th International Conference on Flow Dynamics, Sendai, Japan. (2016)
20The multi-GPU implementation for natural convection problems with multiple open boundaries. The 5th AICS International Symposium, Kobe, Japan. (2014)
21The simulation of transient process of gas discharge by multi-GPU with CUDA platform. The 20th IEEE International Conference on Parallel and Distributed Systems, Hsinchu, Taiwan. (2014)
22An investigation of swing phenomena of natural convection in parallel square Plates by a hybrid boundary condition. The 11th International Conference on Flow Dynamics, Sendai, Japan. (2014)
23Experimental and computational film cooling with backward injection for cylindrical and fan-shaped holes. Proceedings of the 15th International Heat Transfer Conference, Kyoto, Japan. (2014)
24An investigation of natural convection in parallel square plates with a heated top surface by a hybrid boundary condition. The 9th International Conference on Flow Dynamics, Sendai, Japan. (2012)
25The application of microphone array system and numerical fluid algorithm for jet propulsion wind tunnel noise prevention. Proceedings of the Internoise 2012/ASME NCAD meeting. (2012)
26The Fundamental Research of jet Acoustic Noise. The 8th International Conference on Flow Dynamics , Sendai, Japan. (2011)
計畫名稱擔任工作起訖年月補助機構
以沉浸式邊界法及高效能運算探討高速滾珠軸承之油氣潤滑氣障效應計畫主持人112-08-01 ~ 115-07-31國科會
AR視覺輔助助聽器雙耳方向性調整方法共同主持人112-06-01 ~ 113-05-31國科會
具收縮因數粒子群演算法應用於漸縮槽孔薄膜冷卻之研究計畫主持人111-08-01 ~ 112-07-31國科會
以直接數值模擬(DNS)法及平行運算探討渦輪機引擎葉片之薄膜冷卻效益計畫主持人109-08-01 ~ 111-07-31國科會
以Building Cube Method發展GPU超級電腦應用於大規模可壓縮紊流燃燒之數值計算計畫主持人108-10-01 ~ 111-07-31國科會
工具機用旋轉視窗最佳化分析計畫主持人112-09-01 ~ 113-03-31旺毅企業有限公司
整合物理學習之製程模擬技術應用研究計畫主持人112-04-01 ~ 112-11-30工業技術研究院
In line環境氣流場模擬技術對應即時監控:印刷機環境氣流場與Particle預警監控研究計畫計畫主持人111-12-01 ~ 113-01-31友達光電股份有限公司
通風、熱流之計算流體動力學模擬計畫主持人111-03-15 ~ 111-12-31中華民國工業安全衛生協會
生物載體反應器流況模擬計畫主持人111-10-01 ~ 111-11-04工業技術研究院
污水處理廠水泵節能優化演算法設計計畫主持人110-06-15 ~ 110-10-15工業技術研究院
以數值模擬探討高速主軸軸承油氣潤滑氣障現象之先期基礎研究計畫主持人109-07-01 ~ 110-06-30上銀科技股份有限公司
工具機用旋轉視窗噪音改善計畫主持人108-12-01 ~ 109-06-30旺毅企業有限公司
污水處理廠節能改善方案與能耗模擬技術開發計畫主持人108-10-02 ~ 109-04-30工業技術研究院