系所成員 Faculty and Staff

Name 黃朱瑜/Chu-Yu Huang
Title 副教授
Education 美國華盛頓大學 機械工程 博士
Office Phone 04-22840433 ext.419
Office 機械系館4樓 P419
Email tomhuangnchu.edu.tw
Division 固力設計組、系統控制組、精密製造組
Laboratory 應科大樓4樓 AT446
Laboratory Phone 04-22840165 ext.4462
Website 感測器實驗室
Research Expertise 光機電感測裝置、奈微米感測裝置、超音波影像、光聲影像
  • University of Washington, Seattle, Mechanical Engineering Ph.D. (2004.03~2009.12)
  • National Chung Hsing University Mechanical Engineering M.S. (1997.09~1999.06)
  • National Chung Hsing University Mechanical Engineering B.S.(1993.09~1997.06)
現職(Current):
Associate Professor, Department of Mechanical Engineering, National Chung Hsing University, Taiwan (2022/08~current )
2016~2022:
Assistant Professor, Department of Mechanical Engineering, National Chung Hsing University, Taiwan (2016/08~2022/07 )
2013 - 2016:
Researcher, Industrial Technology Research Institute, Biomedical Technology and Device Research Laboratories, Taiwan
2010 - 2013:
Researcher, Industrial Technology Research Institute, Electronics and Optoelectronics Research Laboratories, Taiwan
2007 - 2009:
Teaching associate of Introduction to Visualization and Computer-Aided Design class, University of Washington, U.S.A.
2007 summer:
Lecturer of Introduction to Visualization and Computer-Aided Design class, University of Washington, U.S.A.
2005 - 2006:
Research assistant of shear sensor development project, University of Washington, U.S.A.
2001 - 2003:
CIM Engineer, Vanguard International Semiconductor Corporation, Taiwan
學期科目名稱學分開設班級
第111學年度 第1學期靜力學3A
第110學年度 第2學期感測器原理、設計與應用3碩士班
第110學年度 第2學期工程圖學 Engineering Drawing2B
第110學年度 第1學期電腦輔助機械製圖2B
第110學年度 第1學期機械工程實驗(一)1A
第109學年度 第2學期感測器原理、設計與應用3碩士班
第109學年度 第2學期工程圖學 Engineering Drawing2B
第108學年度 第1學期電腦輔助機械製圖2B
第108學年度 第1學期工場實習(一) Machine Shop Practice(I)1A
第108學年度 第1學期機械設計與製作專題 Special Topics in Mechanical Engineering Design2AB
第107學年度 第2學期工程圖學 Engineering Drawing2B
第107學年度 第2學期工場實習(二) Machine Shop Practice (II)1B
第107學年度 第2學期機械設計與製作專題 Special Topics in Mechanical Engineering Design2AB
第107學年度 第2學期專題討論(一) Seminar (I)0G
第106學年度 第2學期進階程式設計 Advanced Programming3AB

 Journal papers:

    1. Shi, HY., Huang, CY.*, Electrochemical surface-enhanced Raman spectroscopy using Au@Ag core–shell nanostructure arrays for ultrasensitive caffeine detection.  Journal of Nanoparticle Research, Vol. 28, No. 251. (2026) (SCI) (IF: 3.5)

    2. Hsin-Wang Lin, Chu-Yu Huang*, Tunable silicon cone nanostructures via solid-state dewetting of silver thin films as anisotropic wet etch masks: Processing–structure–property relationships for SERS applications, Materials Chemistry and Physics, Volume 365, (2026) (SCI) (IF: 4.7)

    3. Hsiao-Ning Weng, Chu-Yu Huang*, A common-path digital holographic microscope with a rotatable birefringent prism for synthesizing high-quality quantitative phase images from multi-angle interferograms, Results in Physics, Volume 31. (2021) (SCI) (IF: 4.476)

    4. Huang, C.-Y.*; Hsiao, H.-C. Integrated EC-SERS Chip with Uniform Nanostructured EC-SERS Active Working Electrode for Rapid Detection of Uric Acid. Sensors, 2020, 20, 7066. (2020) (SCI) (IF: 3.576)

    5. Huang, C.-Y.*; Chien, C.-H. "Facile Fabrication of Micro/Nano Hierarchical SERS Sensor via Anisotropic Etching and Electrochemical Treatment for Malachite Green Detection," Applied Sciences, 2019, 9(23), 5237. (2019) (SCI) (IF: 2.679)

    6. Chu-Yu Huang* and Ming-Shiuan Tsai "Tunable Silver Nanoparticle Arrays by Hot Embossing and Sputter Deposition for Surface-Enhanced Raman Scattering," Applied Sciences, vol. 9, no. 8, p. 1636, Apr. (2019) (SCI) (IF: 2.679). 

    7. Chu-Yu Huang* and Ming-Shiuan Tsai "Fabrication of 3D nano-hemispherical cavity array plasmonic substrate for SERS applications," International Journal of Optomechatronics, 12:1, 40-52 (2018) (SCI) (IF: 1.9).

    8. Chu-Yu Huang and Wei-Chih Wang*, "Birefringent prism based Fourier transform spectrometer," Optics Letters, Vol. 37, Issue 9, pp. 1559-1561, (2012) (SCI) (IF: 3.714).

    9. Chu-Yu Huang, Wei-Chih Wang*, “Compact Liquid Crystal Based Fourier Transform Spectrometer System,” International Journal of Optomechatronics, Vol. 4, Iss. 2, (2010) (SCI) (IF: 1.9).

    10.  W. -C. Wang, W. R. Ledoux, C. -Y. Huang, et al., “Development of a Microfabricated Optical Bend Loss Sensor for Distributive Pressure Measurement,” IEEE Transactions on Biomedical Engineering, Volume:55, Issue 2, Part:1, 2008, 614-625 (SCI) (IF: 4.538).

    11. Chu-Yu Huang (Univ. of Washington, Seattle, USA); Wei-Chih Wang; Wen-Jong Wu; Ledoux, W.R. “Composite optical bend loss sensor for pressure and shear measurement,” Source: IEEE Sensors Journal, v 7, n 11, Nov. 2007, p 1554-65 (SCI) (IF: 3.301).

    12.  Wang, G. J., Chen, J. L., and Huang, C. Y., “A New Optimization Strategy For Chemical Mechanical Polishing Process,” JSME International Journal, Series C, Vol.44, No. 2., (2001). (NSC88-2212-E-005-016)(SCI)

 

 Conference papers:

    1. Chu-Yu Huang, Ming-Shiuan Tsai, Tunable Silver Nanoparticle Arrays For Surface-Enhanced Raman Scattering. ASME IDETC / CIE 2019, Anaheim, CA, USA. (Aug. 2019)

    2. Chu-Yu Huang, Ming-Shiuan Tsai, Fabrication of Micro/Nanostructured Surface-Enhanced Raman Scattering Sensor Using Nanoimprint and Nanoparticle Self-Assembly. ASME IDETC / CIE 2018, Quebec, Canada. (Aug. 2018)

    3. Chu-Yu Huang, Ming-Shiuan Tsai, "Development of batch producible hot embossing 3D nanostructured surface-enhanced Raman scattering chip technology," Proc. SPIE 10356, Nanostructured Thin Films X, 103560R (Sep. 2017)

    4. Chu-Yu Huang, Wen-Hun Cheng, and Chir-Weei Chang, "Ultrafast high quality ultrasound imaging using k-space beamforming and angular compounding with coherence factor." 2015 IEEE International Conference on Consumer Electronics - Taiwan, Taipei, Taiwan, 2015, pp. 182-183. 

    5. Chu-Yu Huang, Wen-Hun Cheng, and Chir-Weei Chang, "Extended Shear Wavefront Generation Using Cubic Phase Wavefront Modulating Method ," The International Tissue Elasticity Conference, Sep. 2015

    6. Chu-Yu Huang and Chir-Weei Chang " Extended Depth of Focus Ultrasound Imaging Technology," International Conference on Biomedical Ultrasound (ICBMU), 22-23 OCT. 2013

    7. Chu-Yu Huang; Wei-Chih Wang, "A fourier transform spectrometer based on birefringent interferometer," Optomechatronic Technologies (ISOT), 2012 International Symposium on Optomechatronic Technologies, vol., no., pp.1,4, 29-31, Oct. 2012

    8. C. Y. Huang, B.  Estroff, W.C. Wang, “Compact Fourier transform spectrometer without moving parts,” Health Monitoring of Structural and Biological Systems 2012. Proceedings of the SPIE, Volume 8348, pp. 83480W-83480W-11 (2012)

    9. Kuo-Chi Chiu, Sheng-Li Chang, Chu-Yu Huang and Hann-Wen Guan, "Design and fabrication of substrates with microstructures for bio-applications through the modified optical disc process", Proc. SPIE 8068, 80680F (2011);

    10. Sheng-Li Chang, Kuo-Chi Chiu, Chu-Yu Huang, and Hann-Wen Guan, " A novel high efficiency approach for immobilizing bio-molecules”, Annual Symposium on Biomedical Engineering and Technology, pp.141111192, Aug. 2011

    11. C. Y. Huang, SPRi (Surface Plasmon Resonance Imagine) Platform Development, EOL update, Volume 13, Jan. 2011

    12.  Wei-Chih Wang; Chu-Yu Huang; Te-Kuang Chiang; Reinhall, P.G.,Univ. of Washington, “Optical and mechanical characterization of microfabricated optical bend loss sensor for distributive pressure measurement,” Proceedings of the SPIE - The International Society for Optical Engineering, v 6532, 6 April 2007, p 65321K-1-10

    13. Chu-Yu Huang, Wen-Jong Wu , Shih-Chieh Fu, Per G. Reinhall, Wei-Chih Wang, Univ. of Washington, “A wireless composite optical bend loss sensor for pressure and shear measurement,” Proceedings of SPIE -- Volume 6177 (Mar. 15, 2006)

    14. Chu-Yu Huang, Chao-Shih Liu, Reynold Panergo, Cheng-Sheng Huang, and Wei-Chih Wang,” Developments of a force image algorithm for micromachined optical bend loss sensor,” Proceedings of SPIE, Volume 5768, May 2005, pp. 36-43

    15. Wang, G. J., Chen, J. L., and Hwang, J. Y., 2000, “A New Optimization Strategy For Chemical Mechanical Polishing Process,” Proceeding of the 2000 ASME International Mechanical Engineering Congress, Orlando, Florida.

    16. Wang, G. J. and Huang, J. Y., 1999, “A New Optimization Approach for CMP Process, “Proceeding of the 6th Symposium on Nano Device Technology, Taiwan, pp. 119-119.

計畫名稱擔任工作起訖年月補助機構
新型高光譜成像系統之開發及其智慧化細菌快速篩檢應用計畫主持人110-08-01 ~ 111-10-31科技部
開發新型數位全像顯微系統及其智慧化細胞檢測應用計畫主持人108-08-01 ~ 110-07-31科技部
整合奈米電子、聲波電子、電化學技術之複合感測器研發及其在生物檢測之應用共同主持人107-08-01 ~ 109-07-01科技部
航太蜂巢複合材料之智慧機器手臂超音波加工系統(3/3)共同主持人108-08-01 ~ 109-07-01科技部
開發可熱壓成型大量製造之三維奈米表面增強拉曼晶片技術及其塑化劑檢測應用(2/2)計畫主持人107-08-01 ~ 108-07-01科技部
開發可熱壓成型大量製造之三維奈米表面增強拉曼晶片技術及其塑化劑檢測應用(1/2)計畫主持人106-08-01 ~ 107-07-01科技部
航太蜂巢複合材料之智慧機器手臂超音波加工系統(1/3)共同主持人106-08-01 ~ 107-07-01科技部
開發可調式奈米表面增強拉曼結構技術計畫主持人105-08-01 ~ 106-07-01科技部
超高速超音波成像技術及組織彈性影像量測技術計畫主持人103-03-01 ~ 104-03-01行政院經濟部
應用於超音波系統之高速長焦深成像技術開發計畫主持人101-03-01 ~ 102-03-01行政院經濟部
表面電漿共振影像技術平台開發子計畫主持人99-03-01 ~ 100-03-01行政院經濟部
微小化高速傅立葉光譜系統研究人員96-04-01 ~ 98-10-01UW
Electro-optic scanner 超高速掃描裝置研究人員95-04-01 ~ 96-04-01NIH
微製造的力量分佈感測器研究人員94-04-01 ~ 95-04-01VA hospital